Elo TouchSystems 1947L manual Installing the Serial Touch Driver for MS-DOS and Windows

Page 23

Installing the Serial Touch Driver for MS-DOS and Windows 3.1

You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS.

To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below:

1Insert the Elo CD-ROM in your computer’s CD-ROM drive.

2From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM (your CD-ROM drive may be mapped to a different drive letter).

3Type install and press Enter to start the installation.

4Align the touchscreen.

You must have already completed Steps 1 and 2 before proceeding. Refer to Chapter 2 of the Elo DOS and Windows Driver Guide as necessary for additional installation information.

To run the INSTALL program:

1Type INSTALL at the DOS prompt in the directory containing the driver install files.

2INSTALL asks you to select the software to install. Then choose d:\EloDos_W31 from the displayed list.

3INSTALL also asks you for the paths to use during installation, or you may use its defaults. INSTALL creates directories as necessary, and warns you if they exist.

If you are updating your software, you may wish to specify the paths containing the earlier versions, and overwrite the obsolete files. All executable programs are upward compatible. For a list of differences from each previous version of the drivers, be sure to select "Differences from Previous Versions" during the installation process.

INSTALL updates your AUTOEXEC.BAT file with the drivers you select. INSTALL makes a copy of your original AUTOEXEC.BAT file, called AUTOEXEC.OLD. If you already have Elo driver commands in your AUTOEXEC.BAT file, they will be commented out.

When INSTALL is finished, it leaves a file called GO.BAT in the subdirectory you specified. GO loads the touchscreen driver, runs the calibration program ELOCALIB, and gives you some final instructions.

If you are using Windows 3.1, you will also calibrate the touchscreen within Windows 3.1 with the Touchscreen Control Panel.

2-19

Image 23
Contents Page Elo Entuitive Touchmonitor User Guide Table of Contents Copyright 2004 Elo TouchSystems Inc. All Rights Reserved About the Product PrecautionsIntroduction Page Unpacking Your Touchmonitor Installation and SetupMain Unit Rear View Product OverviewBottom View Attaching the L-BracketsMounting Options Panel Cut OutsHorizontal Mount Vertical Mount Horizontal Side Mount Serial or USB Connection Touch Interface ConnectionConnecting the Video Cable Connecting the Serial/USB Touchscreen Cable Connecting the OSD Remote Cable Connecting the Power Cable Vesa Mount on Your Touchmonitor Optimizing the LCD DisplayVesa Mounting Interface Installing the Driver Software 2000, Me, 95/98 and NT Installing the Serial Touch DriverInstalling the Serial Touch Driver for MS-DOS and Windows Page Operation About Touchmonitor AdjustmentsUsing the On-Screen Display OSD Menus Control Function Remote OSD Buttons1280 x 64.0 OSD Menu FunctionPage Solutions to Common Problems TroubleshootingPage Native Resolution Page Touchmonitor Safety Care and Handling of Your Touchmonitor Compatible Video Modes Technical SpecificationsLCD Touchmonitor ET1947L-XXWC-1 Specifications Treatment Agency Approvals Other Features IntelliTouch Touchmonitor SpecificationsEnvironmental Per Astm D1003 Visual Resolution AccuTouch Touchmonitor SpecificationsFront Dimensions LCD Touchmonitor ET1947L-XXWA-1 DimensionsRear Dimensions Page Regulatory Information Electrical Safety InformationPage N10051 Page Warranty Page Index