Elo TouchSystems 1947L manual IntelliTouch Touchmonitor Specifications

Humidity	Operating: 20-80%
	Storage: 5-95%
	non condensing
Weight	Actual: 20 lb. (9.1 kg)
	Shipping: 29 lb. (13.2 kg)
Touch Interface	Serial, USB
Surface	Anti-glare
Treatment

Agency

Approvals

Other Features

UL/cUL, FCC, IC, CE, TÜV-GS,

VCCI, C-Tick

100 or 75 mm VESA mounting

Rear mount through bezel or with brackets; panel mount option User controls:

•Remote (1.8mm cable) OSD: Auto/Sel, up, down

•OSD: contrast, brightness, H/V position, color, temperature, clock, phase, language

IntelliTouch Touchmonitor Specifications

Mechanical

Positional Accuracy	Standard deviation of error is less than 0.080 in. (2.03 mm).
	Equates to less than ±1%.
Touchpoint Density	More than 100,000 touchpoints/in2 (15,500 touchpoints/cm2).
Touch Activation Force	Typically less than 3 ounces (85 grams).
Surface Durability	Surface durability is that of glass, Mohs’ hardness rating of 7.
Expected Life Performance	No known wear-out mechanism, as there are no layers, coatings,
	or moving parts. IntelliTouch technology has been operationally
	tested to more than 50 million touches in one location without
	failure, using a stylus similar to a finger.
Sealing	Unit is sealed to protect against splashed liquids, dirt, and dust.
Optical
Light Transmission	90%
(per ASTM D1003)

Visual Resolution

Gloss (per ASTM D2457

using a 60-degree gloss meter)

All measurements made using USAF 1951 Resolution Chart, under 30X magnification, with test unit located approximately 1.5 in (38 mm) from surface of resolution chart.

Clear surface: Excellent, with no noticeable degradation.

Antiglare surface: 6:1 minimum.

Antiglare surface: Curved: 60 ± 20 gloss units or 75 ± 15 gloss units.

C-33