Elo TouchSystems 1725L, 1727L manual Table C.2 IntelliTouch Touchmonitor Specifications

Page 35

Table C.2 IntelliTouch Touchmonitor Specifications

Mechanical Positional Accuracy

Touchpoint Density

Touch Activation

Force

Surface Durability

Expected Life

Performance

Sealing

Optical

Light Transmission (perASTM D1003) Visual Resolution

Gloss (per ASTM D2457 using a 60- degree gloss meter)

Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%.

More than 100,000 touchpoints/in2 (15,500 touchpoints/cm2). Typically less than 3 ounces (85 grams).

Surface durability is that of glass, Mohs’hardness rating of 7.

No known wear-out mechanism, as there are no layers, coatings, or moving parts. IntelliTouch technology has been operationally tested to more than 50 million touches in one location without failure, using a stylus similar to a finger.

Unit is sealed to protect against splashed liquids, dirt, and dust.

82% AccuTouch; 92% IntelliTouch Typical , 84% Surface Capacitive.

All measurements made using USAF 1951 Resolution Chart, under 30X magnification, with test unit located approximately

1.5 in (38 mm) from surface of resolution chart.

Clear surface: Excellent, with no noticeable degradation.

Antiglare surface: 6:1 minimum.

Antiglare surface: Curved: 60 ± 20 gloss units or 75 ± 15 gloss units.

C-31

Image 35
Contents Elo Entuitive Touchmonitor User Guide Elo Entuitive Touchmonitor User Guide Trademark Acknowledgments Copyright 2005 Elo TouchSystems Inc. All Rights ReservedDisclaimer Table of Contents About the Product PrecautionsIntroduction Elo Entuitive Touchmonitor User Guide Unpacking Your Touchmonitor Installation and SetupRear View Product OverviewMain Unit Base Bottom View Side ViewSerial or USB or both Serial and USB Connection Touch Interface ConnectionRouting the Cables Connecting the Video Cable Page Connecting the Speaker Cable Connecting the Power Cable Vesa Mounting Interface Optimizing LCD DisplayMounting the Base Accessing the Vesa Mounting InterfaceInstalling the Driver Software Click Start Run Installing the Serial Touch DriverInstalling the Serial Touch Driver for MS-DOS and Windows Installing the USB Touch Driver Elo Entuitive Touchmonitor User Guide Operation About Touchmonitor AdjustmentsUsing the On-Screen Display OSD Menus Down Power SwitchSide Bezel Buttons Control FunctionContrast OSD Menu FunctionExit Problem Suggestions TroubleshootingSolutions to Common Problems Elo Entuitive Touchmonitor User Guide Input Video 17 LCD Native ResolutionElo Entuitive Touchmonitor User Guide Touchmonitor Safety Care and Handling of Your Touchmonitor Compatible Video Modes Technical SpecificationsMode Resolution Frequency kHz Frequency Hz Touchmonitor Specifications Table C.2 IntelliTouch Touchmonitor Specifications Protection per EN 61 000-4-2 Touch Activation Force PerASTM D1003 Visual ResolutionMechanical Construction Positional AccuracyLCD Touchmonitor ET172XL-XXWF-XDimensions See Detail a II. Emissions and Immunity Information Electrical Safety InformationRegulatory Information Elo Entuitive Touchmonitor User Guide MPR Warranty Page Numerics IndexPhase Check out Elo’s Web site