Dukane SF3000, HD 4010, SF4030, SF4010, SF5510, SF6000, SF3010 manual Setup Instructions SF Models

Page 10

SETUP INSTRUCTIONS SF MODELS

1.Set unit on projection table in the vertical position (handle up).

2.Slide bottom door latches out and swing both doors around to magnet latches. Pull out the entire power cord. Leave doors open.

3.Tip unit over to rest on its legs. (Doors act as feet for the unit).

4.Turn focus knob clockwise until it stops at the end of the mast.

5.Rotate mast up until it locks into place.

6.Rotate the projection head assembly counterclockwise to the working position.

	7. Open mirror.	Doors must be
	7. Open mirror.	open for unit
		open for unit
	STEP 1 —	to operate.
	STEP 1 —	STEP 2 —
		Slide
		latches out
		and swing
		doors open.

Remove entire cord.

STEP 3 —

STEP 4 —

STEP 5 —

4

Image 10

Contents Models Year Limited Warranty Important Safety Instructions Lamp life and reduces operating costs Table of Contents Page Specifications Electrical Safety Grounding InstructionsPower Switch Index of Functional PartsDoor Latch one each side keeps doors closed Setup Instructions SF Models Foldup Instructions Setup Instructions HD Models Operation = OFFHigh/Low Lamp Switch Lamp Replacement Cleaning ServicingTroubleshooting Information on Lamp WarrantyOptional Accessories SF Models PaddedOptional Accessories HD Models 401-545-05