LAMP REPLACEMENT
Your projector uses:
3000, 3010 — 360W, ENX.
4010, 4030, 5510, 6000 — 410W, FXL.
WARNING
Lamp and adjacent metal parts are hot. Allow lamp to cool
before replacing. Glass components may shatter.
Handle carefully.
To Remove an Exhausted Lamp:
1.Remove the lamp by squeezing the lamp retainer clip and remove lamp.
2.Avoid touching the new lamp — oily skin can cause discoloration of the lamp capsule or reflector.
3.Push the new lamp down into socket until firmly seated and the reflector lines up with the aperture.
9