High/Low Lamp Switch
When using with an LCD panel, use the projector at its brightest lumen output (Models 6000, 5510, 4030, 4010).
Reduce light output (High/Low switch) to extend lamp life. Ideal when using regular transparencies.
Lamp Changer
The lamp changer allows you to quickly replace a failed lamp. Turn the power switch “OFF.” Simply push slightly, then slide the lamp changing lever towards the side labeled “RESERVE.”
LEVER
CAUTION: If the OHP is brought directly from a cold to a warm location or it is placed in a very humid room, moisture may condense on electrical and optical parts in the unit. If this occurs, wait for OHP to reach room temperature before turning it “ON.”
CAUTION
Do not overload 120V AC outlets with accessories that
exceed a total of 5 amps.
8