To connect SCART output (RGB)
Before connections: An exclusive SCART adapter
NOTE: Audio signal is not available for this connection.
RGB IN | Projector |
|
Video equipment such as DVD player
| To RGB IN |
Commercially available Female |
|
SCART cable |
|
1.Turn off the power to the projector and your video equipment.
2.Use the NEC
3.Turn on the power to the projector and your video equipment.
4.Use the RGB button on the remote control to select the RGB input.
5.Press the MENU button on the remote control to display the menu.
6.From the menu, select [Advanced] → [Signal Select RGB] → [Scart]. SCART is a standard European
NOTE: The
Connecting an External Monitor
Audio cable (not supplied)
LINE IN
PHONE
RGB signal cable (supplied)
RGB signal cable (not supplied)
You can connect a separate, external monitor to your projector to simul- taneously view on a monitor the RGB analog image you're projecting. To do so:
1.Turn off the power to your projector, monitor and computer.
2.Use a
3.Turn on the projector, monitor and the computer.
NOTE:
•The RGB OUT connector outputs RGB signal during standby mode. When the projector goes into standby mode, the image on an external monitor disap- pears for a moment.
•When the projector is in the standby mode, the image may not be correctly displayed while the cooling fans are running immediately after turning on or off the power.
•Daisy chain connection is not possible.