Dukane 8054, 8767 manual Connecting Your DVD Player, Rgb

Connecting Your DVD Player

RGB IN

Audio Equipment

	DVD player
AUDIO IN
L R	AUDIO OUT
	L R

Audio cable (not supplied)

Optional 15-pin-to-RCA (female)×3 cable (ADP-CV1)

Component video RCA×3 cable (not supplied)

Component

Y Cb Cr

You can connect your projector to a DVD player with component output or Video output. To do so, simply:

1.Turn off the power to your projector and DVD player.

2.If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCAX3) and the op- tional 15-pin-to-RCA (female)×3 cable to connect your DVD player to the RGB IN connector on the projector.

For a DVD player without component video (Y,Cb,Cr) output, use common RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector.

3. Turn on the projector and DVD player.

NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements,

E-15