SCREEN menu
Item
Description
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1)Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button.
The SOURCE NAME menu will be displayed.
(2)Use the ▲/▼ buttons on the SOURCE NAME menu to select the port to be named and press the ► button. The SOURCE NAME dialog will be displayed. Right side of the menu is blank until a name is specified.
(3)Select an icon you'd like to assign to the port in the SOURCE NAME dialog. The name assigned to the port will also be automatically switched according to your icon selection. Press the ► or ENTER button to determine your icon selection.
(4)Select a number you'd like to assign for the port along with the icon. You can select the number either from blank (no number assigned), 1, 2, 3, or 4.
(5)If you'd like to modify the name assigned to the port, select CUSTOM NAME and press the ► button.
(6)The current name will be displayed on the first line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at one time, press the RESET button or press the ◄ and INPUT button at the same time. Also if you move the cursor to DELETE or ALL CLEAR on screen and press the ENTER or INPUT button, 1 character or all characters will be erased. The name can be a maximum of 16 characters.
(7)To change an already inserted character, press the ▲ button to move the cursor to the first line, and use the ◄/► buttons to move the cursor on the character to be changed.
After pressing the ENTER or INPUT button, the character is selected. Then, follow the same procedure as described at the item (6) above.
(8)To finish entering text, move the cursor to the OK on screen and press the ►, ENTER or INPUT button. To revert to the previous name without saving changes, move the cursor to the CANCEL on screen and press the ◄, ENTER or INPUT button.
(continued on next page)
43