Dukane 8888 user manual Standby Mode, Monitor OUT

SETUP menu

Item	Description
	Using the ▲/▼ buttons changes the eco mode setting.
ECO MODE	NORMAL ó ECO
	• When the ECO is selected, acoustic noise and screen brightness
	are reduced.
	Using the ▲/▼ buttons switches the mode for mirror status.
MIRROR	NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT

If the Transition Detector is on and MIRROR status is changed, TRANSITION DETECTOR ON alarm (54) will be displayed when projector is restarted after the AC power is turned off.

Using ▲/▼ buttons switches the standby mode setting between

NORMAL and SAVING.

NORMAL ó SAVING

•When SAVING is selected and the projector is in the standby state, the power consumption is lowered with some functional

STANDBY MODE	restrictions as below.
	- The RS-232C communication control is disabled except turning
	the projector on and changing the STANDBY MODE setting.
	- The STANDBY of the MONITOR OUT (below) is invalid, and no
	signal is output from the MONITOR OUT port.
	- The AUDIO OUT STANDBY of the AUDIO SOURCE (39) is
	invalid, and no signal is output from the AUDIO OUT ports (5).

	While the image signal from the input port chosen in step (1) is
	projected, the image signal from the input port selected in step (2)
	is output to MONITOR OUT port.
	(1) Choose a picture input port using
	▲/▼ buttons.
	Choose STANDBY to select the
	picture output in the standby mode.
	(2) Select one of the COMPUTER IN
	ports using ◄/► buttons.
MONITOR OUT	Select OFF to disable the MONITOR
	OUT port for the input port or standby
	mode chosen in the step (1).
	• You cannot select COMPUTER IN1 in step (1) and COMPUTER IN2
	in step (2) and vice versa.
	• If you have changed the setting of STANDBY, it applies only to
	the current standby mode, NORMAL or SAVING, selected under
	STANDBY MODE, without changing the setting of the other mode.
	The factory settings are as follows:
	- COMPUTER IN1 for the NORMAL mode of STANDBY MODE
	- OFF for the SAVING mode of STANDBY MODE

38