Dukane 8888 user manual Auto Power, Off, Lamp Time

Page 47

OPTION menu

Item

Description

 

Using the ▲/▼ buttons adjusts the time to count down to

 

automatically turn the projector off.

 

Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)

AUTO POWER

When the time is set to 0, the projector is not turned off automatically.

OFF

When the time is set to 1 to 99, and when the passed time with no-

 

signal or an unsuitable signal reaches at the set time, the projector

 

lamp will be turned off.

 

If one of the projector's buttons or the remote control buttons

 

is pressed or one of the commands (except get commands) is

 

transmitted to the CONTROL port during the corresponding time,

 

projector will not be turned off.

 

Please refer to the section “Turning off the power” (15).

 

The lamp time is the usage time of the lamp, counted after the last

 

resetting. It is shown in the OPTION menu.

 

Pressing the RESET button on the remote control or the ► button

 

of the projector displays a dialog.

LAMP TIME

To reset the lamp time, select the OK using the ► button.

CANCEL OK

 

•Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

•For the lamp replacement, see the section "Replacing the lamp"

(57, 58).

 

The filter time is the usage time of the air filter, counted after the last

 

resetting. It is shown in the OPTION menu.

 

Pressing the RESET button on the remote control or the ► button

 

of the projector displays a dialog.

FILTER TIME

To reset the filter time, select the OK using the ► button.

CANCEL OK

 

 

• Please reset the filter time only when you have cleaned or replaced

 

the air filter, for a suitable indication about the air filter.

 

• For the air filter cleaning, see the section “Cleaning and replacing

 

the air filter” (59, 60).

(continued on next page)

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents Checking the contents of package FeaturesHOT Part namesProjector HOTSTANDBY/ON button &15 Control panelRear panel &10 Computer button &18 Remote controlDown button &14 Volume + button &17 Model Setting upArrangement On a horizontal surface Suspended from the ceilingArrangement other models Arrangement Speakers Connecting your devicesMonitor VCR/DVD/Blu-ray Disc playerAbout Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyAbout the remote control signal Remote controlInstalling the batteries Using as a simple PC mouse & keyboard STANDBY/ON button Power indicator Power on/offTurning on the power Turning off the powerPrecaution for lens cover attachment and removal Temporarily muting the sound Adjusting the volumeSelecting an input signal OperatingMY Source Press the MY Source / DOC. Camera button onComputer button Video buttonSignal 43  169   For no signal Searching an input signal For a computer signal  For a video signal, s-video signal or component videoAdjusting the zoom and focus Adjusting the projectors elevatorAdjusting the position Using the automatic adjustment featureKeystone button Correcting the keystone distortionsMagnify ON/OFF button Using the magnify featureBlank button Temporarily freezing the screenTemporarily blanking the screen Freeze buttonAdvanced Menu Using the menu functionReset button Easy MenuIndication Meaning Position buttonIndication in OSD On Screen Display Auto Keystone Picture ModeDescription AspectFilter Time ECO ModeReset MirrorGamma Picture menuBrightness ContrastTint CustomColor Temp ColorSAVE-1, SAVE-2, SAVE-3, SAVE-4 MY MemoryOver Scan For a computer signalFor no signal Image menuExecute PhaseAuto Adjust SizeColor Space Input menuProgressive Video NRFrame Lock Video FormatComputer Resolution Mode Setup menuAuto ECO Monitor OUT Standby ModeAudio Source VolumeAudio menu SpeakerStart UP Screen menuBlank MyScreen registration is finished Capturing error has occurred. Please try againDescription MyScreen Message MyScreen LockSource Name Template Channel Description Closed CaptionDisplay Auto Direct PowerOption menu Auto SearchLamp Time Auto PowerOFF MY Button Filter Message ServiceFAN Speed GhostInformation Factory ResetKEY Lock Security PasswordSecurity menu Enter the Security menuMyScreen Turning on the MyScreen PasswordTurning off the MyScreen Password If you have forgotten your PIN Code PIN LockTurning on the PIN Lock Turning off the PIN LockTurning off the Transition Detector TransitionTurning on the Transition Detector DetectorTurning off the MY Text Password Turning on the MY Text PasswordMY Text Password Writing MY TextReplacing the lamp MaintenanceReplacing the lamp Type numberLamp warning High Voltage High TemperatureType number UX36761 Filter set Cleaning and replacing the air filterCleaning and replacing the air filter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorMessage Description TroubleshootingRelated messages Regarding the indicator lamps Lamp Temp Resetting all settingsPower Indicator indicator DescriptionInput changeover settings are mismatched Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workMute function is working Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableLamp is approaching the end of its product Lifetime ECO Mode function is workingNot properly adjusted Frame Lock function cannot work on Current input signalTroubleshooting Specification SpecificationsSpecifications 221 306
Top Page Image Contents