Dukane 8935 user manual Connecting Your Devices

Page 10

Setting Up (continued)

Connecting Your Devices

WARNING • Whenever attempting to connect other devices to the projector, read thoroughly the "User's Manual - Safety Guide", this manual and the manual of each

device to be connected. Incorrect connecting could result in fire or electrical shock. CAUTION • TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud

noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector.

ATTENTION • Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector. Refer to the section “Technical” of this manual for the pin assignment of connectors and RS-232C communication data.

Some cables have to be used with core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector.

Secure the screws on the connectors and tighten.

Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.

NOTE • Some computers may have multiple display screen modes. Use of some of these modes may not be compatible with this projector.

For some RGB input modes, the optional Mac adapter is necessary.

When the image resolution is changed on a computer, depending on an input, automatic adjust function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to the original. It might be recommended to use other CRT or TFT monitors to change the resolution.

NOTE Plug-and-Play Capability

Plug-and-Play is a system incorporated in the computer, its operating system and peripheral equipment (i.e. display devices).

This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) compatible.

Please take advantage of this function by connecting the accessory RGB cable to the RGB port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

Please use the standard drivers in your computer as this projector is a Plug-and-Play monitor.

8

Image 10
Contents Models 8935/8942 Page Thank you for purchasing this projector Store them in a safe place for future referenceProjector Features PreparationContents Projector Front/Right Part NamesProjector Audio in 1 port E Audio in 2 portRemote Control Remote ControlControl Buttons Setting Up ArrangementAdjusting The Projectors Elevator Using The Lens Shift ButtonsConnecting Your Devices ComputerProjector If using a M1-D input to mouse controlIf using a BNC input NetworkIf using a Scart RGB input If using a s-video signalIf using a component signal VCR/DVD Player ProjectorMonitorProjector Connecting The Power SupplySafety Guide and the following SpeakerProjectorAbout The Laser Pointer Remote ControlPeople. The laser beam can cause vision problems Putting BatteriesOperating The Remote Control Using The Remote ID FeatureUsing The Mouse/Keyboard Control Function Turning On The Power Power ON/OFFTurning Off The Power Selecting An Input Signal OperatingAt a RGB signal not M1-D At a video signal Using The Automatic Adjustment FeatureAt a M1-D signal At a RGB signalPosition Use the cursor buttons Adjusting The Picture PositionCorrecting The Keystone Distortion Dialog and complete this operationMuting The Sound Adjusting The VolumeTemporarily Blanking The Screen Freezing The Screen Using The Magunify FeaturePress the Magnify Button Displaying The Child Window Selecting An Audio InputUsing The Menu Functions Multifunctional SettingsEx. Turning off the built-in speaker Main Menu PICTURE-1 Menu LOAD1 LOAD2 LOAD3 LOAD4 PICTURE-1 MenuSAVE1 SAVE2 SAVE3 SAVE4 Position PICTURE-2 MenuSize Component Input MenuColor Space 3D-YCSInput Menu Power on AdjustPower OFF Auto MenuSearch Auto MenuRGB BNC Video ComponentStart UP Screen MenuBlank Menu PositionScreen Menu How to register your picture as the MyScreenMessage Option Menu Option Menu Dhcp SetupNetwork Menu OFFClick Return to top Click Reboot to complete this operation Network Setting UpEx. Case of IP Address = Lamp Dealer to replace the lamp Replacing The LampKnob Air Filter Caring For The Air FilterCaring For The Inside Of The Projector Caring For The Cabinet And Remote ControlOther Care Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Such as by a power outage blackout, etc Phenomena That May Easily Be Mistaken For Machine DefectsPhenomena That May Easily Be Mistaken For Machine Defects Sound is mutedWarranty And After-Service SpecificationsPage About The Symbols Do not insert liquids or foreign object Never use the projector if a problem should occurUse special caution for children and pets Never disassemble and modifyBe cautious of the power cord connection Be cautious of High temperatures of the projectorNever look through the lens or openings when the lamp is on Be sure to connect with ground wireBe careful in handling the battery of the remote control Be careful in handling the light source lampBe careful in moving the projector Avoid a high temperature environmentRemove the power cord for complete separation Do not put anything on top of the projectorTake care of the lens Do not give the remote control any physical impactTake care of the cabinet and the remote control About bright spots or dark spotsConnecting with notebook computer About displaying characteristicTurn the power on/off in right order Avoid strong raysLamp FCC Statement Warning For the Customers in CanadaPage Dukane Corporation 401-8935/8941B-00

8935 specifications

The Dukane 8935 is a state-of-the-art ultrasonic plastic welding machine known for its advanced features, high efficiency, and versatility in various industrial applications. This model is particularly favored in the fields of automotive, medical, and consumer goods manufacturing, where precision and reliability are paramount.

One of the standout features of the Dukane 8935 is its robust ultrasonic technology. Utilizing high-frequency sound waves, the machine generates localized heat at the joint interface of plastic components, enabling a durable and strong bond without the need for additional adhesives or fasteners. This makes it an environmentally friendly choice for manufacturers who are aiming to reduce waste and increase production sustainability.

The Dukane 8935 is equipped with a powerful digital control system that allows for precise adjustments and monitoring during the welding process. Users can easily configure parameters such as power, time, and pressure to achieve optimal results for a wide range of materials and part geometries. The machine's intuitive touchscreen interface simplifies operation, making it accessible even for operators with minimal training.

Another significant characteristic of the Dukane 8935 is its advanced energy monitoring capabilities. This feature provides real-time feedback on energy consumption, allowing manufacturers to optimize their processes and reduce costs. Additionally, the machine's compact design and lightweight construction facilitate easy integration into existing production lines without requiring extensive modifications.

Moreover, the Dukane 8935 offers exceptional versatility, supporting multiple welding modes, including continuous and spot welding. This adaptability allows manufacturers to use the machine for various applications, from delicate medical devices to robust automotive components. The machine is also compatible with a wide range of thermoplastics, providing even more flexibility in production.

In terms of safety, the Dukane 8935 incorporates several protective features to ensure safe operation. These include automatic shut-off functions and safety interlocks that prevent the machine from operating when doors are open or when safety conditions are not met.

Overall, the Dukane 8935 represents an impressive convergence of technology, efficiency, and safety in the realm of ultrasonic welding, making it a preferred choice for diverse manufacturing sectors looking to enhance productivity and product quality. With its cutting-edge features, the Dukane 8935 continues to set a standard in ultrasonic welding technology.