Dukane 8935 user manual Caring For The Air Filter

Page 41

Air Filter

WARNING • Please carefully read the “User’s Manual - Safety Guide.

•Before caring, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently.

•Use only the air filter of the specified type NJ08081.

•Do not use the projector with the air filter and filter cover removed. The use without the air filter could result in damage.

CAUTION • If the air filter becomes clogged by dust or the like, internal temperature rises and could cause malfunction. The power is automatically turned

off in order to prevent the projector from overheating internally.

Caring For The Air Filter

The air filter should be cleaned about every 100 hours. If the indicators or a message prompts you to clean the air filter, clean the air filter as soon as possible.

If the soiling will not come off the air filter, or it becomes damaged, then it needs to be replaced. Please replace the air filter as soon as possible.

memo When you replace the lamp, please replace also the air filter.

1

Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at

least 45 minutes.

 

After making sure that the projector has cooled adequately, remove the filter cover

2

and air filter.

3

Apply a vacuum cleaner to the top of the filter cover and

the air filter to clean.

If the soiling will not come off the air filter, or it becomes damaged, it needs to be replaced.

If the air filter needs to be replaced, contact your dealer to prepare a new air filter. Tell the dealer your air filter type.

Hold the release buttons of the filter cover while pulling down it.

4

Insert the cleaned air filter or a new air filter, and replace

the filter cover.

Turn on the projector power, and reset the filter timer.

5 (1) While the projector running, press the MENU button to open the menu.

(2)Choose the “OPTION” on the menu using the / button, then press the button or ENTER button.

(3)Choose the “FILTER TIME” using the / button, then press and hold the RESET button for 3 seconds.

(4)Choose the “RESET” using the button.

Hold the release button of the air filter while pulling out it.

memo Incorrectly resetting of the filter timer (resetting

without replacement, or neglect of resetting after replacement) will result in incorrect message functions.

39

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Models 8935/8942 Page Store them in a safe place for future reference Thank you for purchasing this projectorPreparation Projector FeaturesContents Projector Part NamesProjector Front/Right Audio in 1 port E Audio in 2 portControl Buttons Remote ControlRemote Control Arrangement Setting UpUsing The Lens Shift Buttons Adjusting The Projectors ElevatorConnecting Your Devices If using a BNC input If using a M1-D input to mouse controlComputerProjector NetworkIf using a component signal If using a s-video signalIf using a Scart RGB input VCR/DVD Player ProjectorSafety Guide and the following Connecting The Power SupplyMonitorProjector SpeakerProjectorPeople. The laser beam can cause vision problems Remote ControlAbout The Laser Pointer Putting BatteriesUsing The Remote ID Feature Operating The Remote ControlUsing The Mouse/Keyboard Control Function Turning Off The Power Power ON/OFFTurning On The Power Operating Selecting An Input SignalAt a M1-D signal Using The Automatic Adjustment FeatureAt a RGB signal not M1-D At a video signal At a RGB signalCorrecting The Keystone Distortion Adjusting The Picture PositionPosition Use the cursor buttons Dialog and complete this operationTemporarily Blanking The Screen Adjusting The VolumeMuting The Sound Press the Magnify Button Using The Magunify FeatureFreezing The Screen Selecting An Audio Input Displaying The Child WindowEx. Turning off the built-in speaker Multifunctional SettingsUsing The Menu Functions Main Menu PICTURE-1 Menu SAVE1 SAVE2 SAVE3 SAVE4 PICTURE-1 MenuLOAD1 LOAD2 LOAD3 LOAD4 Size PICTURE-2 MenuPosition Color Space Input MenuComponent 3D-YCSInput Menu Power OFF AdjustPower on Auto MenuRGB BNC Auto MenuSearch Video ComponentBlank Screen MenuStart UP Menu PositionMessage How to register your picture as the MyScreenScreen Menu Option Menu Option Menu Network Menu SetupDhcp OFFEx. Case of IP Address = Network Setting UpClick Return to top Click Reboot to complete this operation Lamp Knob Replacing The LampDealer to replace the lamp Caring For The Air Filter Air FilterOther Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Phenomena That May Easily Be Mistaken For Machine Defects Such as by a power outage blackout, etcSound is muted Phenomena That May Easily Be Mistaken For Machine DefectsSpecifications Warranty And After-ServicePage About The Symbols Use special caution for children and pets Never use the projector if a problem should occurDo not insert liquids or foreign object Never disassemble and modifyNever look through the lens or openings when the lamp is on Be cautious of High temperatures of the projectorBe cautious of the power cord connection Be sure to connect with ground wireBe careful in handling the light source lamp Be careful in handling the battery of the remote controlRemove the power cord for complete separation Avoid a high temperature environmentBe careful in moving the projector Do not put anything on top of the projectorTake care of the cabinet and the remote control Do not give the remote control any physical impactTake care of the lens About bright spots or dark spotsTurn the power on/off in right order About displaying characteristicConnecting with notebook computer Avoid strong raysLamp For the Customers in Canada FCC Statement WarningPage Dukane Corporation 401-8935/8941B-00

8935 specifications

The Dukane 8935 is a state-of-the-art ultrasonic plastic welding machine known for its advanced features, high efficiency, and versatility in various industrial applications. This model is particularly favored in the fields of automotive, medical, and consumer goods manufacturing, where precision and reliability are paramount.

One of the standout features of the Dukane 8935 is its robust ultrasonic technology. Utilizing high-frequency sound waves, the machine generates localized heat at the joint interface of plastic components, enabling a durable and strong bond without the need for additional adhesives or fasteners. This makes it an environmentally friendly choice for manufacturers who are aiming to reduce waste and increase production sustainability.

The Dukane 8935 is equipped with a powerful digital control system that allows for precise adjustments and monitoring during the welding process. Users can easily configure parameters such as power, time, and pressure to achieve optimal results for a wide range of materials and part geometries. The machine's intuitive touchscreen interface simplifies operation, making it accessible even for operators with minimal training.

Another significant characteristic of the Dukane 8935 is its advanced energy monitoring capabilities. This feature provides real-time feedback on energy consumption, allowing manufacturers to optimize their processes and reduce costs. Additionally, the machine's compact design and lightweight construction facilitate easy integration into existing production lines without requiring extensive modifications.

Moreover, the Dukane 8935 offers exceptional versatility, supporting multiple welding modes, including continuous and spot welding. This adaptability allows manufacturers to use the machine for various applications, from delicate medical devices to robust automotive components. The machine is also compatible with a wide range of thermoplastics, providing even more flexibility in production.

In terms of safety, the Dukane 8935 incorporates several protective features to ensure safe operation. These include automatic shut-off functions and safety interlocks that prevent the machine from operating when doors are open or when safety conditions are not met.

Overall, the Dukane 8935 represents an impressive convergence of technology, efficiency, and safety in the realm of ultrasonic welding, making it a preferred choice for diverse manufacturing sectors looking to enhance productivity and product quality. With its cutting-edge features, the Dukane 8935 continues to set a standard in ultrasonic welding technology.
Top Page Image Contents