Dukane 8935 user manual Phenomena That May Easily Be Mistaken For Machine Defects, Sound is muted

Page 48

Troubleshooting (continued)

Phenomena That May Easily Be Mistaken For Machine Defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

pages

 

 

 

 

 

 

The signal cables are not correctly connected.

8, 9

 

Correctly connect the connection cables.

 

 

 

 

 

Pictures are

The volume is adjusted to an extremely low level.

19, 32

Adjust the VOLUME to a higher level.

 

displayed,

 

 

The sound is muted.

 

but no sounds

19

are heard.

Press the MUTE button to restore the sound.

 

 

 

 

 

The audio input is not correctly selected when the child window

22

 

is displayed.

 

Correctly select the audio input.

 

 

 

 

 

The lens cap is attached.

4, 15

 

Remove the lens cap.

 

 

 

 

 

Sounds are

The signal cables are not correctly connected.

8, 9

heard,

Correctly connect the connection cables.

 

but no pictures

The brightness is adjusted to an extremely low level.

23

are displayed.

Adjust the BRIGHT to a higher level using the menu function.

 

 

 

 

 

 

The screen is blanked.

19

 

Press the BLANK button to return to the input signal screen.

 

 

 

 

 

Colors have a

Color settings are not correctly adjusted.

 

faded- out

Perform picture adjustments by changing the COLOR BAL R,

24

appearance, or

COLOR BAL G, COLOR BAL B, COLOR and/or TINT settings, using

 

Color tone is poor.

the menu functions.

 

 

 

 

 

The brightness and/or contrast are adjusted to an extremely low

 

 

level.

23

 

Adjust the BRIGHT and/or CONTRAST settings to a higher level

 

 

Pictures appear

using the menu function.

 

 

 

dark.

The WHISPER function is working.

23

 

Select the NORMAL to the item WHISPER in the MAIN menu.

 

 

 

 

 

 

The lamp is approaching the end of its product lifetime.

35, 36

 

Replace the lamp.

 

 

 

 

 

 

Either the focus and/or horizontal phase settings are not

 

 

properly.

16

Pictures appear

Adjust the focus using the focus buttons, and/or H PHASE using the

 

menu function.

 

blurry.

 

 

 

 

 

 

 

The lens is dirty or misty.

38

 

Clean the lens by referring to the section “Caring For The Lens”.

 

 

 

 

 

Input signal

The INPUT dial is set between the click points.

 

changes with no

16

Turn the INPUT dial and set it at a click point.

operation.

 

 

 

 

 

 

46

Image 48
Contents Models 8935/8942 Page Thank you for purchasing this projector Store them in a safe place for future referenceProjector Features PreparationContents Part Names ProjectorProjector Front/Right Audio in 1 port E Audio in 2 portRemote Control Remote ControlControl Buttons Setting Up ArrangementAdjusting The Projectors Elevator Using The Lens Shift ButtonsConnecting Your Devices If using a M1-D input to mouse control If using a BNC inputComputerProjector NetworkIf using a s-video signal If using a component signalIf using a Scart RGB input VCR/DVD Player ProjectorConnecting The Power Supply Safety Guide and the followingMonitorProjector SpeakerProjectorRemote Control People. The laser beam can cause vision problemsAbout The Laser Pointer Putting BatteriesOperating The Remote Control Using The Remote ID FeatureUsing The Mouse/Keyboard Control Function Power ON/OFF Turning On The PowerTurning Off The Power Selecting An Input Signal OperatingUsing The Automatic Adjustment Feature At a M1-D signalAt a RGB signal not M1-D At a video signal At a RGB signalAdjusting The Picture Position Correcting The Keystone DistortionPosition Use the cursor buttons Dialog and complete this operationAdjusting The Volume Muting The SoundTemporarily Blanking The Screen Using The Magunify Feature Freezing The ScreenPress the Magnify Button Displaying The Child Window Selecting An Audio InputMultifunctional Settings Using The Menu FunctionsEx. Turning off the built-in speaker Main Menu PICTURE-1 Menu PICTURE-1 Menu LOAD1 LOAD2 LOAD3 LOAD4SAVE1 SAVE2 SAVE3 SAVE4 PICTURE-2 Menu PositionSize Input Menu Color SpaceComponent 3D-YCSInput Menu Adjust Power OFFPower on Auto MenuAuto Menu RGB BNCSearch Video ComponentScreen Menu BlankStart UP Menu PositionHow to register your picture as the MyScreen Screen MenuMessage Option Menu Option Menu Setup Network MenuDhcp OFFNetwork Setting Up Click Return to top Click Reboot to complete this operationEx. Case of IP Address = Lamp Replacing The Lamp Dealer to replace the lampKnob Air Filter Caring For The Air FilterCaring For The Cabinet And Remote Control Other CareCaring For The Inside Of The Projector Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Such as by a power outage blackout, etc Phenomena That May Easily Be Mistaken For Machine DefectsPhenomena That May Easily Be Mistaken For Machine Defects Sound is mutedWarranty And After-Service SpecificationsPage About The Symbols Never use the projector if a problem should occur Use special caution for children and petsDo not insert liquids or foreign object Never disassemble and modifyBe cautious of High temperatures of the projector Never look through the lens or openings when the lamp is onBe cautious of the power cord connection Be sure to connect with ground wireBe careful in handling the battery of the remote control Be careful in handling the light source lampAvoid a high temperature environment Remove the power cord for complete separationBe careful in moving the projector Do not put anything on top of the projectorDo not give the remote control any physical impact Take care of the cabinet and the remote controlTake care of the lens About bright spots or dark spotsAbout displaying characteristic Turn the power on/off in right orderConnecting with notebook computer Avoid strong raysLamp FCC Statement Warning For the Customers in CanadaPage Dukane Corporation 401-8935/8941B-00

8935 specifications

The Dukane 8935 is a state-of-the-art ultrasonic plastic welding machine known for its advanced features, high efficiency, and versatility in various industrial applications. This model is particularly favored in the fields of automotive, medical, and consumer goods manufacturing, where precision and reliability are paramount.

One of the standout features of the Dukane 8935 is its robust ultrasonic technology. Utilizing high-frequency sound waves, the machine generates localized heat at the joint interface of plastic components, enabling a durable and strong bond without the need for additional adhesives or fasteners. This makes it an environmentally friendly choice for manufacturers who are aiming to reduce waste and increase production sustainability.

The Dukane 8935 is equipped with a powerful digital control system that allows for precise adjustments and monitoring during the welding process. Users can easily configure parameters such as power, time, and pressure to achieve optimal results for a wide range of materials and part geometries. The machine's intuitive touchscreen interface simplifies operation, making it accessible even for operators with minimal training.

Another significant characteristic of the Dukane 8935 is its advanced energy monitoring capabilities. This feature provides real-time feedback on energy consumption, allowing manufacturers to optimize their processes and reduce costs. Additionally, the machine's compact design and lightweight construction facilitate easy integration into existing production lines without requiring extensive modifications.

Moreover, the Dukane 8935 offers exceptional versatility, supporting multiple welding modes, including continuous and spot welding. This adaptability allows manufacturers to use the machine for various applications, from delicate medical devices to robust automotive components. The machine is also compatible with a wide range of thermoplastics, providing even more flexibility in production.

In terms of safety, the Dukane 8935 incorporates several protective features to ensure safe operation. These include automatic shut-off functions and safety interlocks that prevent the machine from operating when doors are open or when safety conditions are not met.

Overall, the Dukane 8935 represents an impressive convergence of technology, efficiency, and safety in the realm of ultrasonic welding, making it a preferred choice for diverse manufacturing sectors looking to enhance productivity and product quality. With its cutting-edge features, the Dukane 8935 continues to set a standard in ultrasonic welding technology.