High Voltage High Temperature | Dukane 8920H, 8919H specs

Replacing the lamp (continued)

HIGH VOLTAGE

HIGH TEMPERATURE

HIGH PRESSURE

WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to ﬂy into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.

►About disposal of a lamp: This product contains a mercury lamp; do not put it in a trash. Dispose of it in accordance with environmental laws.

•For lamp recycling, go to www.lamprecycle.org (in the US).

•For product disposal, consult your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada).

For more information, ask your dealer.

		• If the lamp should break (it will make a loud bang when it does),
		unplug the power cord from the outlet, and make sure to request a
		replacement lamp from your local dealer. Note that shards of glass
		could damage the projector’s internals, or cause injury during handling,
	Disconnect	so please do not try to clean the projector or replace the lamp yourself.
	Disconnect	• If the lamp should break (it will make a loud bang when it does),
	the plug
	from the	ventilate the room well, and make sure not to breathe the gas that
	power	comes out of the projector vents, or get it in your eyes or mouth.
	outlet	• Before replacing the lamp, turn the projector off and unplug the power
		cord, then wait at least 45 minutes for the lamp to cool sufficiently.
		Handling the lamp while hot can cause burns, as well as damaging the lamp.

•Never unscrew except the appointed (marked by an arrow) screws.

•Do not open the lamp cover while the projector is suspended from a ceiling. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken.

•Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.

•Use only the lamp of the speciﬁed type.

•If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, consult your local dealer or a service representative.

• Handle with care: jolting or scratching could cause the lamp bulb to burst during use.

•Using the lamp for long periods of time, could cause it dark, not to light up or to burst. When the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage.

ENGLISH

8920H, 8919H specifications

Dukane's 8919H and 8920H ultrasonic welding systems represent cutting-edge solutions in the fabrication and assembly industries. These machines are designed to optimize productivity while maintaining superior quality in ultrasonic welding applications.

One of the main features of the Dukane 8919H and 8920H is their advanced ultrasonic technology, which utilizes high-frequency sound waves to create strong and durable welds. This process not only provides quick assembly times but also minimizes thermal effects on the surrounding materials, thus ensuring component integrity.

Both models offer a robust generator that produces stable and reliable ultrasonic energy. The intelligent design of these systems allows for precise tuning and control of the frequency, which enhances welding efficiency and effectiveness. This is particularly important when working with challenging materials that require specific energy inputs for optimal welding.

The user-friendly interface of the Dukane 8919H and 8920H systems is another highlight. The intuitive touchscreen controls enable operators to easily program various welding parameters, monitor real-time process data, and adjust settings on the fly. This feature significantly reduces the learning curve for new users and streamlines operations for experienced technicians.

Another significant characteristic of the 8919H and 8920H is their versatility. These ultrasonic welders can successfully process a wide array of materials, including thermoplastics, metals, and composite materials. This adaptability makes them suitable for various industries, from automotive and medical to electronics and consumer goods.

Dukane has also incorporated advanced monitoring technologies into these systems, allowing for enhanced process control and quality assurance. Features such as weld data logging and real-time feedback facilitate compliance with industry standards and provide valuable insights for continuous improvement.

In addition, both models boast a compact design that allows for easy integration into existing manufacturing lines without requiring significant floor space. Their durability and low maintenance requirements further contribute to their cost-effectiveness, making them a wise investment for manufacturers aiming to enhance productivity.

Overall, the Dukane 8919H and 8920H ultrasonic welding systems are exemplary machines that combine reliability, efficiency, and ease of use. Their innovative features and capabilities make them ideal for a wide range of applications, ensuring that they meet the demands of today's fast-paced manufacturing environments while delivering high-quality results.