Getting Started
SETTING CLOCK AT POWER UP
You will be prompted to enter the time of day in the event of a power failure or when you first provide electric power to your appliance.
°When your appliance is first powered up, 12:00 will flash in the display.
*Enter the time of day using the numeric key pads and press START to set.
If an invalid time of day is entered, the control will triple beep.
Select the CLOCK @ key to modify the time of day during other situations such as day light savings.
TIMER
The timer provided with the oven control serves as an extra reminder in the kitchen. When the timer reaches less than 1
minute the display will start to count down in seconds. When the time runs out the active timer will beep, and "End" will be displayed.
The following time settings apply to the timers:
°Min. time: 1 minute
°Max. time: 11 hours 59 minutes
See example below to set the timer for 5 minutes:
1.Press TIMER SET/OFF
2.Enter 5 minutes
3.Press START
To cancel or end the timer, press the TIMER SET/OFF key again.
NOTE: The timer(s) will not affect the cooking process.
TO SET ADD 1 MINUTE FEATURE
The ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the pad is pressed, 1 minute is added to the Timer feature if this feature is already active. If the Timer feature is not active and the pad is pressed, the Timer
feature will become active and will begin counting down from 1 minute. For further information on how to set the
Timer feature see Timer instructions above.
USING THE AIRGUARD FEATURE (SOME MODELS)
Your appliance is equipped with a catalytic oven exhaust cleaner that may be turned on during any cooking process. This feature helps remove smoke and eliminates 85% of the odors generated when using your oven. DO NOT use AirGuard when baking delicate bakery items.
If you wish to clean the oven exhaust once cooking has started, press AIRGUARD.
NOTE: The AirGuard indicator light wiii glow anytime
AirGuard is active. AirGuard will automatically turn on and cannot be manually turned off during the
PREHEAT TEMPERATURE DISPLAY
Once a cooking feature has been started in one of the
ovens, the control will display the actual oven temperature while preheating. Once the oven reaches the oven set temperature only the oven set temperature will display.
The preheat temperature display is available with the following cooking modes:
*Bake in lower oven
°Cony Bake in both ovens
CONTROL LOCI(
Two control locks are available on this unit. The lower oven control loci< will lock the oven controls and the lower
oven door. The microwave control loci< will only loci< the microwave controls.
See example below to loci< the lower oven.
To loci<, press and hold STOP for 3 seconds.
To unlock, press and hold STOP for 3 seconds.
DOOR LOCKED wiii flash in the display until the door has finished locking. Once the door has been locked the door lock indicator will turn on. DOOR LOCKED will then display in the upper oven cavity only.
Do not attempt to open the oven door while the door loci< indicator is flashing.
ACCENT LIGHT
Your appliance includes a decorative Accent light centered horizontally across the
When the Accent light is off, the light is in automatic mode.
This means the Accent light will turn on automatically when an oven or Timer has been activated. The Accent light will
turn off automatically when these functions are no longer active.
When the Accent light is OFF, it may be manually turned ON by pressing the Accent Light keypad once. When the Accent light has been manually turned on, it will remain on until manually turned off by pressing the Accent Light keypad again. The brightness of the Accent light may also be adjusted.
See example below to adjust Accent light brightness:
1.Press and hold the ACCENT LIGHT keypad until an acceptance tone sounds (about 6 seconds).
2.Using the numeric keypads, enter any digit from 0 to 100 to change the brightness level. Entering 0 will effectively turn the Accent light OFF until the brightness level is adjusted to a higher level.
3.Press START to save the desired brightness setting.
12