PROGRAMMING

4.Press MUTE (ENTER) again. The display shows:

5.Press VOLUME to choose the setting.

6.Press MUTE (ENTER).

To continue programming the remain-

ing lines press VOLUME and then perform steps 4-6.

6. CO Line Ring Tone

Default Setting: 1

Range: 1-4

You can choose one of four different ringing tones for your telephone. The selection chosen will apply to all four CO lines on your telephone.

1.Press PROGRAM.

2.Press VOLUME until the display shows:

3.Press MUTE (ENTER). The display shows:

4.Press VOLUME to select a dif- ferent ring tone. You will hear a sample tone for each choice.

5.Press MUTE (ENTER).

7. Delayed Ringing

Default Setting: Disabled

Range: Disable, 2 seconds to 30 sec- onds (2 second increments)

You may choose to have the CO line ringing delayed for overflow and caller ID applications.

1.Press PROGRAM.

2.Press VOLUME until the display shows:

3.Press MUTE (ENTER). The display shows:

4.Press VOLUME to select the delay time between 2 seconds and 30 seconds (in 2 second incre- ments).

5.Press MUTE (ENTER).

8.CO Trunk Connection

Default Setting: All Lines Connected

Your telephone can detect another tele- phone, facsimile, or modem that is in- use on one or more of the CO lines.This privacy feature will prevent accidental instruction by another VT4121 speak- erphone user. The “Line-In-Use” circuit will light the CO line button if the line is not physically connected. For instance, if you only have lines 1,2, and 3 con- nected you can disable line 4( if you do not disable that line, the lamp will re- main lit steady even though you can’t access the line). When you disable a CO line the lamp and button will not op- erate.

15

Page 15
Image 15
VTech VT 4121 manual CO Line Ring Tone, Press Mute Enter Delayed Ringing