VTech VT 4121 manual Call Forward, Default Setting OFF Range

PROGRAMMING

1.	Press PROGRAM.	shows:
2.	Press VOLUME until the display
	shows:

3.Press MUTE (ENTER),The display shows:

4.Press MUTE (ENTER). The display shows:

5.Press VOLUME to choose the setting.

6.Press MUTE (ENTER) to save.

To continue programming the remain-

ing lines press VOLUME and then perform steps 4-6.

9. Automatic Line Selection

Default Setting: CO 1

4.Press VOLUME to choose the line( or intercom) you want to pro- gram for this feature.

5.Press MUTE (ENTER) to save.

10. Call Forward

Default Setting: OFF

Range 11-22

When this feature is enabled (on) any intercom or transferred call you receive will be forwarded to the Speakerphone extension that you have identified.

When the feature is enabled, upon re- ceiving a call you will hear a triple tone and the display will briefly show Call forward on the display prior to the call being forwarded.

1.Press PROGRAM.

2.Press VOLUME until the display shows:

The line that you assign for automatic line selection( line preference) will be automatically accessed when you pick up the handset or press SPEAKER.

1.Press PROGRAM.

2.Press VOLUME until the display shows:

3.Press MUTE (ENTER). The display

3.Press MUTE (ENTER). The display shows:

4.Press VOLUME to select the extension number (11-22) where you want to forward your calls.

5.Press MUTE (ENTER) to save.

16