VTech VT 4121 manual Retrieving a Call on Hold, Making an Intercom Call 12.1 Using the Handset

Models: VT 4121

1 42
Download 42 pages 9.48 Kb
Page 23
Image 23

BASIC OPERATION

2.Hang up.

Press ICM. If you want to make an

intercom call without autotransferring the line or simply hang up the handset and the line will remain on hold.

11. Retrieving a Call on Hold

When you place a call on Hold at your speakerphone you will hear a brief re- mainder tone after 30 seconds.

To retrieve a held call press the line button corresponding to the holding line.

12.Making an Intercom Call 12.1 Using the Handset

Note: Skip Step 1 if you programmed the intercom for Automatic Line Selection.

1.Press ICM. The display will show:

2.Lift the handset.

3.Dial the desired intercom number (from 11 to 22). For instance, if you dial intercom number 15 the display will show:

When the person you called answers, your display will show:

4. Hang up the handset to end the call.

Note1: If the telephone you are call- ing is busy, you will hear busy tone. If the telephone you are calling is in Do Not Disturb (DND) mode, you will hear DND tone.

Note 2: If you do not perform Step 3 above within approximately 10 seconds, the intercom will be released.

12.2 Using the Speakerphone

Note: Skip Step 1 below if you pro- grammed the intercom for Auto- matic Line Selection.

1.Press ICM. The display will show:

2.Press SPEAKER.

3.Dial the desired intercom number (from 11 to 22). For instance, if you dial intercom number 15 the dis- play will show:

When the person you called answers, your display will show:

4. Press SPEAKER to hang up.

Note 1: If the telephone you are call- ing is busy, you will hear busy tone. If the telephone you are calling is in Do Not Disturb

23

Page 23
Image 23
VTech VT 4121 manual Retrieving a Call on Hold, Making an Intercom Call 12.1 Using the Handset