FUNCTION

(default setting/value)

3.

 

SOURCE menu

Quick Auto Search

 

 

(On)

 

Presentation Timer

 

(Off)

4.

Language

(English)

SYSTEM

Auto Power Off

 

Projector Position

SETUP:

(Front Table)

(Disable)

 

 

Blank Timer

Basic

(Disable)

Panel Key Lock

 

menu

(Off)

Timer Controller

 

(Disable)

 

Splash Screen

 

(MITSUBISHI logo)

 

Quick Cooling

5.

(Off)

 

SYSTEM

High Altitude Mode

 

SETUP:Advanced

(Off)

Menu Settings

 

menu

Lamp Settings

 

DESCRIPTION (default setting/value)

See "Switching input signal" on page 20 for details.

Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 27 for details.

Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 18 for details.

See "Choosing a location" on page 11 for details.

Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off" on page 36 for details.

Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 28 for details.

Disables or enables all panel key functions except II Power on the projector and keys on the remote control. See "Locking control keys" on page 28 for details.

Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours.

Allows you to select which logo screen will display during projector start-up. Three options are available: MITSUBISHI logo, Black screen, or Blue screen.

Selecting On enables the function and the projector cooling time will be shortened to a few seconds.

If you attempt to restart the projector right after the quick cooling process, it may not be turned on successfully and will rerun its cooling fans.

A mode for operation in high altitude areas. See "Operating in a high altitude environment" on page 29 for details.

Menu display time (15 sec)

Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments.

Menu position (Center)

Sets the On-Screen Display (OSD) menu position.

Lamp mode (Standard)

See "Setting Lamp mode as Low" on page 36 for details.

Reset lamp timer

See "Resetting the lamp timer" on page 39 for details.

Equivalent lamp hour

See "Getting to know the lamp hour" on page 36 for details on how the total lamp hour is calculated.

ENGLISH

EN-33

Page 33
Image 33
Mitsubishi Electronics XD95U Quick Auto Search, Presentation Timer, Language, Auto Power Off, Projector Position