Controls and functions
Projector
1
2
3 | 10 |
| |
4 | 11 |
5 |
|
6 | 12 |
7
13
8 
14
9 | 10 |
|
1.Focus ring
Adjusts the focus of the projected image. See
2.Zoom ring
Adjusts the size of the image. See
3.MENU
Turns on the
4.POWER indicator light
Lights up or flashes when the projector is under operation. See "Indicators" on page 40 for details.
5. II Power
Toggles the projector between standby mode and on. See "Starting up the projector" on page 17 and "Shutting down the projector" on page 29 for details.
6.TEMPerature indicator light
Lights up red if the projector's temperature becomes too high. See "Indicators" on page 40 for details.
7.
Left
Selects the desired menu items and makes adjustments. See "Using the menus" on page 18 for details.
8.LAMP indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 40 for details.
9.BLANK
Used to hide the screen picture. See "Hiding the image" on page 28 for details.
10.Keystone/Arrow keys ( 
/
Up, 
/
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 22 for details.
11.AUTO
Automatically determines the best picture timings for the displayed image. See
12.
Right/ 
Activates panel key lock. See "Locking control keys" on page 28 for details.
When the
13.MODE/ENTER
Selects an available picture setup mode. See "Selecting a picture mode" on page 24 for details.
Enacts the selected
14.SOURCE
Displays the source selection bar. See "Switching input signal" on page 20 for details.
