Mitsubishi Electronics XD95U Hiding the image, Locking control keys, Freezing the image

Models: XD95U

1 45
Download 45 pages 900 b
Page 28
Image 28
Hiding the image

Hiding the image

In order to draw the audience's full attention to the presenter, you can use BLANK on the projector or remote control to hide the screen image. Press any key on the projector or remote control to restore the image. The word 'BLANK' appears at the lower right corner of the screen while the image is hidden.

You can set the blank time in the SYSTEM SETUP: Basic > Blank Timer menu to let the projector return the image automatically after a period of time when there is no action taken on the blank screen.

Locking control keys Once BLANK is pressed, the projector enters Low mode automatically.

Do not block the projection lens from projecting as this could cause the blocking object to become heated and deformed or even cause a fire.

Locking control keys

With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except II Power.

1.Press SETUP: Basic > Panel Key Lock menu, and select On by pressing  / / Freezing the image on the projector or remote control or go to the SYSTEM

SETUP: Basic > Panel Key Lock menu, and select On by pressing Manual background /

Manual background on the projector or remote control.

2. A confirmation message displays. Select Yes to confirm.

To release panel key lock, press and hold Manual background / for 3 seconds on the projector or remote control.

You can also use the remote control to enter the SYSTEM SETUP: Basic > Panel Key Lock and press Manual background / Manual background to select Off.

Manual background • Keys on the remote control are still in use when panel key lock is enabled.

If you press II Power to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on.

Freezing the image

Press FREEZE on the remote control to freeze the image. The word

'FREEZE' will display in the upper left corner of the screen. To release the function, press any key on the projector or remote control.

Even if an image is frozen on the screen, the pictures are running on the video or other device. If the connected devices have active audio output, you will still hear the audio even though the image is frozen on screen.

EN-28

Page 28
Image 28
Mitsubishi Electronics XD95U user manual Hiding the image, Locking control keys, Freezing the image