Mitsubishi Electronics XD95U user manual Shock

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu- lated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOITURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUT- LET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

WARNING

Use the attached specified power supply cord. If you use another power supply cord, it may cause interference with radio and television reception.

Use the attached RGB cable with this equipment so as to keep interfer- ence within the limits of an FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE.

CAUTION

Not for use in a computer room as defined in the Standard for the Pro- tection of Electronic Computer/Data Processing Equipment, ANSI/ NFPA 75.

The attached power cord is to be used exclusively for this product. Never use it for other products.

When using the projector in Europe:

COMPLIANCE NOTICE

This Projector complies with the requirements of the EC Directive 2004/108/EC "EMC Directive" and 2006/95/EC "Low Voltage Direc- tive".

The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterized by their connection to the public low voltage power supply system.

WARNING

Use the attached RGB cable with this equipment so as to keep interfer- ence within the limits of an EN55022 Class B device.

Please follow WARNING instructions.

Note: This symbol mark is for	Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality
EU countries only.	materials and components which can be recycled and/or reused.
This symbol mark is according to	This symbol means that electrical and electronic equipment, batteries and accumula-
the directive 2002/96/EC Article	tors, at their end-of-life, should be disposed of separately from your household waste.
10 Information for users and	If a chemical symbol is printed beneath the symbol shown above, this chemical sym-
Annex IV, and/or to the directive	bol means that the battery or accumulator contains a heavy metal at a certain concen-
2006/66/EC Article 20 Informa-	tration. This will be indicated as follows:
tion for end-users and Annex II.	Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)
	In the European Union there are separate collection systems for used electrical and
	electronic products, batteries and accumulators.
	Please, dispose of this equipment, batteries and accumulators correctly at your local
	community waste collection/recycling centre.
	Please, help us to conserve the environment we live in!

EN-2