Dukane 28A8945, 28A9058 manual Audio Output Jacks

CONNECTING PROJECTOR

SERIAL PORT	SERIAL PORT
IN TERMINAL	OUT TERMINAL

If you control a projector by computer, you must connect a cable (not provided) from your computer to this terminal.

This terminal outputs signal from SERIAL PORT IN. More than two projectors can be controlled with one computer by connecting SERIAL PORT IN. of another projector to this terminal.

		DVI			audio	PC control
					R	L
					(mono)
R/Pr	G/Y	B/Pb	H/HV	V	audio	PC control
					R	L
					(mono)
video/Y	C		S-video		audio
					R	L

		(mono)
serial port IN	audio OUT		USB
	serial port OUT	L
R/C jack	R
reset		(mono)

R/C JACK

When using Wired / Wireless Remote Control Unit as Wired Remote Control, Connect Wired Remote Control Unit to this jack with Remote Control Cable (supplied). (Refer to page 18.)

E

INPUT 1
INPUT 2
3
	USB PORT (Series B)
INPUT
	This port is used to control a projector
	with computer. It is also used to
	control computer with Remote Control
	of this projector.
	(Refer to P40-42.)
	Connect USB port of computer to this
	port.

AUDIO OUTPUT JACKS

Connect an external audio amplifier to these jacks.

(Refer to P14, 15.)

RESET BUTTON

This projector uses a micro processor to control a unit. Occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET function excessively.

13