Connecting power supply
1. Put the connector of the power cord into the |
|
| |
AC IN (AC inlet) of the projector. |
|
| |
Firmly plug the power cord’s plug into the |
|
| |
2. outlet. In a couple of seconds after the power |
|
| |
supply connection, the POWER indicator will |
|
| |
light up in steady orange. | AC IN | Power cord | |
Please remember that when the DIRECT POWER ON | |||
|
|
function activated, the connection of the power supply make the projector turn on. 
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
•Only use the power cord that came with the projector. If it is damaged, consult your dealer to get a new one.
•Only plug the power cord into an outlet whose voltage is matched to the power cord. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation.
•Never modify the power cord.
NOTICE ►This product is also designed for IT power systems with a phase-
8