Focusing
Use the FOCUS + and FOCUS – buttons on the projector or remote control to adjust the screen focus.
Selecting an aspect ratio
Each time you press the ASPECT button on the remote control, it switches the aspect ratio of the image, in turn.
Zooming
Use the
Adjusting the picture position
|
|
|
| ASPECT button |
VIDEO |
| MY SOURCE/ |
|
|
COMPUTER DOC.CAMERA |
| VOLUME+/- button | ||
ASPECT | AUTO | SEARCH | BLANK | |
MAGNIFY | FREEZE | PAGE | VOLUME |
|
ON |
| UP | ＋ |
|
|
|
| ||
OFF | MY 1 | DOWN | MUTE | KEYSTONE button |
2 | ||||
|
| ー |
| |
KEYSTONE | BUTTON |
| MUTE button | |
- FOCUS + | - | |||
POSITION |
|
| MENU | |
| ENTER |
| ||
ESC |
|
| RESET | |
FOCUS + button
FOCUS - button
POSITION button
ENGLISH
After pressing the POSITION button on the remote control, use the ▲, ▼, ◄ and
►buttons. Press the POSITION button again to finish this operation.
Correcting distortion
Press the KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion.
Use the ▲/▼ cursor buttons to select, MANUAL or PERFECT FIT operation, and press the ► button to perform the following.
MANUAL displays a dialog for keystone correction.
PERFECT FIT displays a dialog for adjusting the shape of the projected image in each of the corners and sides.
Use the cursor buttons according to the dialog, checking the image. Press the KEYSTONE button again to finish this operation.
Adjusting the volume
Use the VOLUME +/- buttons to adjust the volume.
Muting the sound
Press the MUTE button on the remote control. To restore the sound, press the MUTE or VOLUME+/- button.
CAUTION ►If you wish to have a blank screen while the projector's lamp is on, use the BLANK function (see the Operating Guide).
Any other method of blocking the projection light, such as attaching something to the lens or placing something in front of the lens, may cause the damage to the projector.
NOTE • The ASPECT button does not work when no proper signal is inputted.
• For details, see the Operating Guide in the CD.
13