Connecting with your devices
Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.
For details, please see “User's Manual” - “Operating Guide” and “Network Guide”. (20, 22)
•When AUTO is selected for the COMPUTER IN1 or COMPUTER IN2 port in COMPUTER IN of the INPUT menu, that port will accept component video signals.
•To use network functions of the projector, connect the LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable.
VCR/DVD/Blu-ray
Disc player
Computer
Access |
|
point | LAN |
|
COMPONENT | Y Cb/Pb Cr/Pr |
AUDIO | USB |
TYPE A | |
R L | |
OUT | 0.5A |
| DC5V |
AUDIO | VIDEO |
R L | |
OUT |
|
AUDIO | R | L |
| OUT |
|
USB TYPE B | HDMI | IN2 | IN1 |
| MIC AUDIO IN1 AUDIO IN3 AUDIO OUT | |
CONTROL | MONITOR OUT |
|
| AUDIO IN2 | VIDEO |
USB HDMI DISPLAY AUDIO
•If you insert a USB storage device, such as a USB memory, into the USB TYPE A port and select the port as the input source, you can view images stored in the device.
•You can connect a dynamic microphone to the MIC port with a 3.5 mm
(continued on next page)
6