Canon SX20 manual Remote Control, COMPUTER-2 button P28

Page 16

BEFORE USE

Remote Control

 

1

 

5

2

3

4

6

7

8

 

9

10

 

11

12

 

14

13

15

 

17

16

18

 

19

21

 

20

1Infrared Remote Emitter

Sends a signal to the infrared remote receiver on the main unit.

2POWER button (P27, 45) Turns the projector on or off.

3MENU button (P50) Displays a menu.

4COMPUTER-1 button (P28, 46)

Selects the image input from the DVI-I/RGB IN-1 terminal.

Pressing this button continuously allows you to select an input signal (DIGITAL RGB or ANALOG RGB-1).

5COMPUTER-2 button (P28, 46)

Selects the image input from the RGB IN-2/ COMPONENT IN/RGB OUT terminal. Pressing this button continuously allows you to select an input signal (ANALOG RGB or

COMPONENT).

6VIDEO/S button (P46)

Select the image input from the VIDEO IN terminal or S-VIDEO terminal.

Pressing this button continuously allows you to select input signals (VIDEO or S-VIDEO).

Remote Control Operating Range

Point the remote control to the infrared remote receiver whenever pressing any button. The maxi-

mum operating range is about 5 m (16.4' ) and 30o in front of the infrared remote receiver.

30o

5m (16.4')

Within 5 m (16.4' ) and

30o

30o in front of infrared remote receiver

The remote control may be inoperative in the following cases:

•When there is an obstacle between the remote control and main unit.

•When the infrared remote receiver on the main unit is exposed to direct sunlight or strong light of lighting equipment.

• All operations of the projector can be controlled with the remote control.

• The remote control uses infrared light.

• When you use two projectors at the same time, you can change the channel settings to prevent the two remote controls from interfering with each other.

16 (P72)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents ’ M l Features of Multimedia Projector SX50 Uses of this ProjectorSetting up the Projector Projector MaintenanceTroubleshooting Be Sure to Read before UseSymbols of Buttons Symbols Used in This ManualSupplied Manuals User’s Manual Quick Start GuideTable of Contents Safety Instructions Safety Precaution Safety Instructions Safety Instructions AC Power Cord Requirement Federal Communication Commission Notice Canadian Radio Interference RegulationsLamp Handling Precautions Use Caution When Carrying or Transporting the ProjectorPay Attention to Hot Air from Exhaust Vent Do Not Use in the Following EnvironmentsSupplied Accessories Before USEPart Names Main Unit of ProjectorRemote Control COMPUTER-2 button P28Installing Remote Control Batteries OK button P51Top Control 10 11 4Video in terminal P42 Service Port jack Input Terminals on Main UnitInstalling the Projector Determining the Distance to the ScreenPlacing in Front of the Screen Determining the Installation PlacePlacing on a Level Place Adjusting the Projection Angle Lift the front of the projector Push the adjusting foot lockConnecting to Video Terminals Connecting the Projector to the ComputerMAC Adapter part No. LV-AD02 Connecting to Audio Terminals Projecting the Image from the Notebook ComputerWindows XP Determining the Output Resolution of the ComputerMacintosh OSX Insert the power plug Connecting the Power CordStarting Projection Unplug the Power Cord When the Projector is Not in Use Turning On the ProjectorSelect a signal type Select a video terminal of the computerUsing the Auto PC Adjustment Function Adjusting the Image Size Adjusting the ImageAdjusting the Focus Adjusting Keystone Distortion Select Keystone AdjustmentCorrect keystone distortion Press the OK buttonProjecting AN Image from the Computer Full screen Normal Selecting a Screen ModeWide Screen True size Selecting an Image Mode Quality Press the Image buttonTurning Off the Projector Ready mode Setting up the Power Management FunctionShutdown mode Blacking Out an Image Temporarily Making an Image Larger/ Smaller Making the Image LargerMaking the Image Smaller Moving the Image to the Desired PositionShowing the Elapsed Time Indicating a Position with a SpotlightMuting the Sound Adjusting the Volume Canceling the Freeze functionFreezing the Picture Freezing an ImageOperating the Mouse Using the Remote Control Connecting the USB CableUsing the Left Button of the Mouse Using the Right Button of the MouseProjecting AN Image from AV Equipment About the Component CableTo Audio OUT Starting Projection Power indicator first blinks green and then turns lit green Select an AV terminal Play the AV equipment Wide Screen VIDEO, S-VIDEO and Component input only Auto Component input onlyUsing Menus Symbols Indicating Item CategoriesDisplay Setting Menu Image Adjustment MenuPress the Menu button Select the tab containing the item you want to setSelect the item you want to set Make a setting Making an Adjustment Using the Slide BarMaking a Setting in a Different Window Selecting from the MenuDisplay Settings Menu Performing the Auto PC AdjustmentAdjusting the Total Number of Dots Tracking Adjusting Horizontal Position Vertical Position Adjusting the Number Horizontal Pixels Vertical Pixels Selecting an Input Signal Type Selecting an Input Signal Type Selecting a Screen Mode Confirm Input Signal TypeSelecting a Screen Mode Selecting a Menu Position Selecting a Logo Display Position Displaying a Logo no Show Displaying a Logo Projector on Selecting an Image Mode Image Adj. MenuAdjusting the Brightness Adjusting the Contrast Adjusting the Sharpness Making a Gamma Correction Adjusting the Color Level Adjusting the Color Balance Correcting the Screen Color Making Advanced Color Adjustment Performing Progressive ProcessingReducing Resetting Lamp Brightness Image Settings Resetting is canceledSystem Settings Menu Outputting an Image to a MonitorSelecting the Power Issuing a Beep Management Mode Prohibiting Registering a Projector Operation Password Setting a Password Setting up the Remote ControlSelecting a Display LanguageResetting Lamp Counter Cleaning the Projector Body Cleaning the ProjectorWhen Not Used for an Extended Period of Time Cleaning the Air Filter Cleaning and Replacing the Air FilterProcedure for Replacing the Air Filter About the Replacement Lamp Replacing the LampProcedure for Replacing the Lamp Install the lamp cover and tightenHandle, and remove the lamp ScrewUnderstanding the Warning Lamp Flash Patterns Flash Pattern Meaning CountermeasureNo power Symptoms and SolutionsNo image Out of focus No soundTop/bottom or left/right reversed Power turns off Cannot project image from notebook computerCannot operate the remote control Cannot operate the wireless mouseComputer Signal Types AppendixRelationship between Screen Size and Projection Distance 50 σ 102 x 69 cm 46 σ 102 xSwitching between Computer and AV Equipment Items in MenuFactory defaults settings after resetting Glossary Analog RGBNumber of pixels in each resolution Specifications External View RGB IN-2/COMPONENT IN/RGB OUTInstalling the Lens Cap Optional PartsCanon U.S.A., INC

SX20 specifications

The Canon SX20 IS is a powerful and versatile digital camera that appeals to both amateur and advanced photographers. Launched in 2009, this camera brought together a range of impressive features that made it a popular choice among consumers seeking quality and convenience in a compact body.

One of the standout features of the Canon SX20 is its 20x optical zoom lens, which spans an impressive focal length equivalent to 28-560mm in 35mm terms. This versatility allows users to capture stunning wide-angle landscapes as well as detailed close-ups of distant subjects. The lens is accompanied by Canon's Optical Image Stabilization technology, which greatly reduces the effects of camera shake, ensuring that images remain sharp and clear even in challenging conditions.

At its heart, the SX20 IS boasts a 12.1-megapixel CCD sensor that delivers high-resolution images with vivid colors and fine details. This sensor works in tandem with Canon's DIGIC 4 image processor, which significantly enhances image quality, reduces noise levels, and improves overall performance. The combination of these technologies enables photographers to shoot in a variety of lighting conditions, from bright sunlight to low-light environments.

In addition to capturing still images, the Canon SX20 IS also excels in video recording. It features the ability to shoot 720p HD video, allowing users to document events with clarity and detail. The camera includes an HDMI output, which makes it easy to connect to HD televisions for instant viewing.

The camera's 2.5-inch vari-angle LCD screen is another noteworthy characteristic. This swivel display allows for creative shooting angles and improved visibility in bright sunlight. Coupled with a comfortable grip and well-placed control buttons, the SX20 IS provides an enjoyable shooting experience.

The Canon SX20 IS also includes a range of advanced shooting modes, such as the Smart Auto mode, which intelligently selects the appropriate settings for various scenes. Other manual controls, such as aperture and shutter priority, are available for those who want more creative control over their photography.

Overall, the Canon SX20 IS stands out with its unique combination of powerful zoom capability, excellent image quality, and user-friendly features, making it an appealing choice for anyone looking to enhance their photography experience without the complexity of interchangeable lenses.
Top Page Image Contents