Canon SX20 manual Safety Instructions

Page 9

Slots and openings in the back and bottom of the cabinet are provided for ventilation, to insure reliable operation of the equipment and to protect it from overheating.

The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of air-conditioning equipment.

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has been damaged.

f.When the projector exhibits a distinct change in performance-this indicates a need for service.

SAFETY INSTRUCTIONS

9

Image 9
Contents ’ M l Uses of this Projector Features of Multimedia Projector SX50Projector Maintenance Setting up the ProjectorTroubleshooting Be Sure to Read before UseSymbols Used in This Manual Symbols of ButtonsSupplied Manuals User’s Manual Quick Start GuideTable of Contents Safety Instructions Safety Precaution Safety Instructions Safety Instructions AC Power Cord Requirement Canadian Radio Interference Regulations Federal Communication Commission NoticeUse Caution When Carrying or Transporting the Projector Lamp Handling PrecautionsDo Not Use in the Following Environments Pay Attention to Hot Air from Exhaust VentBefore USE Supplied AccessoriesMain Unit of Projector Part NamesCOMPUTER-2 button P28 Remote ControlOK button P51 Installing Remote Control Batteries10 11 4 Top ControlInput Terminals on Main Unit Video in terminal P42 Service Port jackDetermining the Distance to the Screen Installing the ProjectorDetermining the Installation Place Placing in Front of the ScreenPlacing on a Level Place Lift the front of the projector Push the adjusting foot lock Adjusting the Projection AngleConnecting the Projector to the Computer Connecting to Video TerminalsMAC Adapter part No. LV-AD02 Projecting the Image from the Notebook Computer Connecting to Audio TerminalsDetermining the Output Resolution of the Computer Windows XPMacintosh OSX Connecting the Power Cord Insert the power plugStarting Projection Turning On the Projector Unplug the Power Cord When the Projector is Not in UseSelect a video terminal of the computer Select a signal typeUsing the Auto PC Adjustment Function Adjusting the Image Adjusting the Image SizeAdjusting the Focus Select Keystone Adjustment Adjusting Keystone DistortionCorrect keystone distortion Press the OK buttonProjecting AN Image from the Computer Selecting a Screen Mode Full screen NormalWide Screen True size Press the Image button Selecting an Image Mode QualityTurning Off the Projector Setting up the Power Management Function Ready modeShutdown mode Blacking Out an Image Temporarily Making the Image Larger Making an Image Larger/ SmallerMaking the Image Smaller Moving the Image to the Desired PositionIndicating a Position with a Spotlight Showing the Elapsed TimeCanceling the Freeze function Muting the Sound Adjusting the VolumeFreezing the Picture Freezing an ImageConnecting the USB Cable Operating the Mouse Using the Remote ControlUsing the Left Button of the Mouse Using the Right Button of the MouseAbout the Component Cable Projecting AN Image from AV EquipmentTo Audio OUT Starting Projection Power indicator first blinks green and then turns lit green Select an AV terminal Play the AV equipment Auto Component input only Wide Screen VIDEO, S-VIDEO and Component input onlySymbols Indicating Item Categories Using MenusDisplay Setting Menu Image Adjustment MenuSelect the tab containing the item you want to set Press the Menu buttonMaking an Adjustment Using the Slide Bar Select the item you want to set Make a settingMaking a Setting in a Different Window Selecting from the MenuPerforming the Auto PC Adjustment Display Settings MenuAdjusting the Total Number of Dots Tracking Adjusting Horizontal Position Vertical Position Adjusting the Number Horizontal Pixels Vertical Pixels Selecting an Input Signal Type Confirm Input Signal Type Selecting an Input Signal Type Selecting a Screen ModeSelecting a Screen Mode Selecting a Menu Position Selecting a Logo Display Position Displaying a Logo no Show Displaying a Logo Projector on Image Adj. Menu Selecting an Image ModeAdjusting the Brightness Adjusting the Contrast Adjusting the Sharpness Making a Gamma Correction Adjusting the Color Level Adjusting the Color Balance Correcting the Screen Color Performing Progressive Processing Making Advanced Color AdjustmentResetting is canceled Reducing Resetting Lamp Brightness Image SettingsOutputting an Image to a Monitor System Settings MenuSelecting the Power Issuing a Beep Management Mode Prohibiting Registering a Projector Operation Password Setting up the Remote Control Setting a PasswordDisplay Language Selecting aResetting Lamp Counter Cleaning the Projector Cleaning the Projector BodyWhen Not Used for an Extended Period of Time Cleaning and Replacing the Air Filter Cleaning the Air FilterProcedure for Replacing the Air Filter Replacing the Lamp About the Replacement LampInstall the lamp cover and tighten Procedure for Replacing the LampHandle, and remove the lamp ScrewFlash Pattern Meaning Countermeasure Understanding the Warning Lamp Flash PatternsSymptoms and Solutions No powerNo image No sound Out of focusTop/bottom or left/right reversed Cannot project image from notebook computer Power turns offCannot operate the wireless mouse Cannot operate the remote controlAppendix Computer Signal Types50 σ 102 x 69 cm 46 σ 102 x Relationship between Screen Size and Projection DistanceItems in Menu Switching between Computer and AV EquipmentFactory defaults settings after resetting Analog RGB GlossaryNumber of pixels in each resolution Specifications RGB IN-2/COMPONENT IN/RGB OUT External ViewOptional Parts Installing the Lens CapCanon U.S.A., INC

SX20 specifications

The Canon SX20 IS is a powerful and versatile digital camera that appeals to both amateur and advanced photographers. Launched in 2009, this camera brought together a range of impressive features that made it a popular choice among consumers seeking quality and convenience in a compact body.

One of the standout features of the Canon SX20 is its 20x optical zoom lens, which spans an impressive focal length equivalent to 28-560mm in 35mm terms. This versatility allows users to capture stunning wide-angle landscapes as well as detailed close-ups of distant subjects. The lens is accompanied by Canon's Optical Image Stabilization technology, which greatly reduces the effects of camera shake, ensuring that images remain sharp and clear even in challenging conditions.

At its heart, the SX20 IS boasts a 12.1-megapixel CCD sensor that delivers high-resolution images with vivid colors and fine details. This sensor works in tandem with Canon's DIGIC 4 image processor, which significantly enhances image quality, reduces noise levels, and improves overall performance. The combination of these technologies enables photographers to shoot in a variety of lighting conditions, from bright sunlight to low-light environments.

In addition to capturing still images, the Canon SX20 IS also excels in video recording. It features the ability to shoot 720p HD video, allowing users to document events with clarity and detail. The camera includes an HDMI output, which makes it easy to connect to HD televisions for instant viewing.

The camera's 2.5-inch vari-angle LCD screen is another noteworthy characteristic. This swivel display allows for creative shooting angles and improved visibility in bright sunlight. Coupled with a comfortable grip and well-placed control buttons, the SX20 IS provides an enjoyable shooting experience.

The Canon SX20 IS also includes a range of advanced shooting modes, such as the Smart Auto mode, which intelligently selects the appropriate settings for various scenes. Other manual controls, such as aperture and shutter priority, are available for those who want more creative control over their photography.

Overall, the Canon SX20 IS stands out with its unique combination of powerful zoom capability, excellent image quality, and user-friendly features, making it an appealing choice for anyone looking to enhance their photography experience without the complexity of interchangeable lenses.