Ethernet

ISYS® WALL MOUNT TOUCHPANELS

Isys® G-Series Wall Mount Touchpanels

Isys® G-Series 12" Wall Mount Touchpanel w/QuickMediaTM TPS-12G-QM-L

10BaseT/100BaseTX, auto-switching, auto-negotiating, full/half duplex, TCP/IP, UDP/IP, CIP, IEEE 802.3U compliant

Video/RGB2

Signal Types: RGB and auto-detecting composite, S-Video, or component video

Formats: SDTV 480i (NTSC) & 576i (PAL), EDTV 480p & 576p, HDTV 720p & 1080i; RGB(VGA) up to UXGA 1600 x 1200 Color Depth: 24-bit, 16.7M colors

Features: Dual-window each scalable to full-screen, time base correction, gamma correction, line doubling, motion adaptive deinterlacing, reverse 3:2/2:2 pulldown

Audio2

Hardware Features: Built-in microphone and biamplified speakers, stereo headphone output, internal volume control and audio mixer Audio Feedback (WAV): 8-bit PCM, mono, 8 kHz sampling rate D-A Conversion (QM): 24-bit, 48 kHz

Amplification: Biamplified, mono, 5 Watts for high-frequency, 5 Watts for low-frequency

Buttons

(4) Backlit “softkey” buttons, programmable

(1) Backlit hard reset button, reboots the touchpanel

Connectors

QM IN 1: (1) 8-wire RJ45 female, QuickMedia input port

Signal Types: Dynamically configurable under system control as:

(1)RGB input with stereo program audio and (2) mic channels, or

(1)Auto-detecting component (YPBPR), S-Video (Y/C), or composite video input with stereo program audio and (2) mic channels;

RGB Format: RGBHV

RGB Input Resolution, Non-interlaced: 640 x 480 minimum to 1600 x 1200 maximum (60 Hz limit at 1600 x 1200);

Video/HDTV Formats: 480i (NTSC), 576i (PAL), 480p, 576p, 720p and 1080i;

Horizontal Frequency: 15 to 100 kHz

Vertical Frequency: 50 to 85 Hz

Delay Skew Compensation: 0 - 22 nS

Connects to QM output port of a QM-TX or other QuickMedia device via CresCAT-QM or CresCAT-IM cable;

Maximum Cable Length: 450 ft (aggregate distance from QM origination)

QM IN 2: (1) 8-wire RJ45 female, QuickMedia input port

Signal Types: Dynamically configurable under system control as:

(1)RGB input with stereo program audio and (2) mic channels, or

(1)Auto-detecting component (YPBPR), S-Video (Y/C), or composite video input with stereo program audio and (2) mic channels;

RGB Format: RGBHV

RGB Input Resolution, Non-interlaced: 640 x 480 minimum to 1600 x 1200 maximum (60 Hz limit at 1600 x 1200);

Video/HDTV Formats: 480i (NTSC), 576i (PAL), 480p, 576p, 720p and 1080i;

Horizontal Frequency: 15 to 100 kHz

Vertical Frequency: 50 to 85 Hz

Delay Skew Compensation: none

Connects to QM output port of a QM-TX or other QuickMedia device via CresCAT-QM or CresCAT-IM cable;

Maximum Cable Length (Video/HDTV): 300 ft (aggregate distance from QM origination);

Maximum Cable Length (RGB @ 60Hz): 216 ft for 640x480, 140 ft for 800x600, 84 ft for 1024x768, 70 ft for 1280x768, 30 ft for 1600x1200 (using CresCAT-QM or CresCAT-IM cable)

QM OUT 1: (1) 8-wire RJ45 female, QuickMedia output port containing RGB (same as touchscreen), WAV file audio, and internal microphone signals;

RGB Format: RGBHV

RGB Output Resolution, Non-interlaced: 800 x 600 pixels @ 60Hz Connects to QM input port of any QuickMedia device via CresCAT-QM or CresCAT-IM cable

HEADPHONES: (1) 3.5 mm TRS mini phone jack

Output Power: 12mW per channel

Minimum Impedance: 32 ohms

RS-232: (1) 6-pin RJ11 female

Computer console, touch output, or mouse/touch input port1 Bidirectional RS-232 up to 115.2k baud

Hardware and software handshaking support

LAN: (1) 8-wire RJ45 with 2 LED indicators 10BaseT/100BaseTX Ethernet port Green LED indicates link status

Yellow LED indicates Ethernet activity

24VDC: (1) 2.1mm barrel DC power jack

24V DC power input (power supply sold separately)

NET: (1) 4-pin 3.5mm detachable terminal block Cresnet Slave Port, connects to Cresnet control network

USB: (2) USB Type A female

USB 1.1 ports for mouse or touchscreen input1

GND: (1) 6-32 screw, chassis ground lug

MEMORY EXP.: (1) Type II Compact Flash card slot For memory expansion

PC CARD A – B: (2) Type II PC Card slots (reserved for future applications)1

Power Requirements

24VDC: 50 Watts (2.08 Amps) @ 24 Volts DC (PW-2420RU power supply sold separately)

Cresnet Power Usage: 50 Watts (2.08 Amps @ 24 Volts DC)

Note: Power should only be applied to the 24VDC power jack OR the NET port, not both.

wall mount touchpanels

> continued