8
Quadrant 1. Top left of VGA image. Quadrant 2. Top right of VGA image. Quadrant 3. Bottom right of VGA
image.
Quadrant 4. Bottom left of VGA image.
To exit Zoom control, press 
.
Operation
12
43
Figure 5. Zoom quadrants
Operation | 9 |
To position the image on the monitor
1.Press 
to display the main menu.
2.Use + or – to select the Position control icon 
.
3.Press 
to enter the Position control mode.
4.Press 
to toggle the Position mode between vertical or horizontal.
5.Press + or – to move the image up/down or left/right.
6.Press 
to exit.
To control brightness
To use pan control
1. | Press | to display the main menu. | ||
2. | Use the + or – buttons to select the Pan control icon | P | . | |
| ||||
| ||||
3.Press 
to enter Pan control mode.
4.Press 
to toggle the Pan mode between vertical and horizontal.
5.Press + or – to pan the display up, down, right, or left.
6.Press 
to exit.
To select Overscan/Underscan mode
By default, the television picture is in Overscan mode, meaning the border of the pic- ture is outside the visible area of the television screen.The Scan Converter also fea- tures Underscan mode, which linearly scales the input picture into the visible part of the television screen.
In Zoom mode, the Overscan/Underscan mode is not supported. Whenever Zoom mode is enabled, the Overscan/Underscan function will be temporarily disabled.
1.Press 
to display the main menu.
2.Use the + and – buttons to select the Overscan/Underscan icon 
.
3.Press 
to enter the Overscan/Underscan control mode.
4.Press + or – to toggle between Overscan/Underscan mode.
5.Press 
to exit.
1.Press 
to display the main menu.
2.Use + and – to locate the Brightness control icon 
.
3.Press 
to enter the Brightness mode.
4.Press + or – to select the desired brightness level.
5.Press 
to exit.
To adjust the color bar
1.Press 
to display the main menu.
2.Press + or – to locate the Color Bar icon 
.
3.Press 
to reset the unit to its default color settings.
4.Press + or – to select the desired level.
5.Press 
to exit.
To reset the unit to default settings
1.Press 
to display the main menu.
2.Press + and – to locate the Reset icon 
.
3.Press 
to reset the unit to its default settings.
4.Press 
to exit.
Technical Services Group ~ | Technical Services Group ~ |