10 | Care and Storage |
Care and Storage
Care and Storage
Do not attempt to take the scan converter apart. There are no
•Keep the unit away from food and liquid.
•Clean exterior of scan converter by wiping with a clean, damp cloth; do not use abrasive chemicals.
Do not store or operate the Scan Converter under the following conditions:
•A temperature above 104°F (40°C) or below 32°F (0°C)
•Environments with high humidity
•Dusty environments
•In inclement weather
•Under severe vibration
Troubleshooting
|
|
|
|
| Problem | Solution |
|
| Green LED does not indicate | Ensure the power supply is connected to a | |
| power is turned on. | wall outlet and to the power port on the rear | |
|
| of the Scan Converter. | |
|
|
|
|
| Green LED is on, but no picture | Check cable connections. Also, verify that | |
| appears on the screen. | the input or output device(s) are powered | |
|
| on. | |
|
| Verify that the correct input is selected | |
|
| and check the brightness setting. | |
|
|
|
|
| Picture is not clear, is garbled, or | Your monitor is not synching to the Scan | |
| is rolling vertically or horizontally. | Converter. Change the output resolution to | |
|
| a lower setting. | |
|
| Change to a different output monitor. | |
|
|
|
|
|
|
|
|
Appendix | 11 |
Appendix |
|
Specifications |
|
Input | |
Horizontal Frequency | 25kHz – 58.464KHz |
Vertical Frequency | 50Hz – 100Hz |
Output Signal | Composite video; |
| computer monitor |
Resolution | 640x480 (VGA), 800x600 |
| 1024x768 @ 75Hz (XGA), 1152x864 |
Power Supply | 9VDC, 600mA power adapter |
Dimensions | Base: 6.5"/165 mm (W) x 4.14"/105 mm (D) |
| x 1.1"/27 mm (H) |
| Remote: 3.4"/86 mm (W) x 1.8"/45 mm (D) |
| x .28"/7 mm (H) |
Weight | 0.51 lb/230 g |
Technical Services Group ~ | Technical Services Group ~ |