Dell S300W manual On-screen display OSD is displayed

4	TEMP warning light		If the TEMP amber indicator is on or blinking,
			one of the following problems could be occurring:
			• Internal temperature of the projector is too
			high
			• Color wheel failure
			For more information, see "Troubleshooting Your
			Projector" on page 80 and "Guiding Signals" on
			page 84.
5	Enter		Press to confirm the selection item.
6	IR Receiver		Point the remote control towards the IR receiver
			and press a button.
7	Right	/ Auto Adjust	Press to navigate through the On-Screen Display
			(OSD) Menu items.
			Press to synchronize the projector to the input
			source.
			NOTE: Auto Adjust does not operate if the
			on-screen display (OSD) is displayed.
8	Down	/ Keystone	Press to navigate through the On-Screen Display
	adjustment		(OSD) Menu items.
			Press to adjust image distortion caused by tilting
			the projector (+40/-35 degrees).
9	Left	/ Source	Press to navigate through the On-Screen Display
			(OSD) Menu items.
			Press to toggle through Analog RGB, Composite,
			Component (YPbPr via VGA), HDMI, and
			S-video sources when multiple sources are
			connected to the projector.
10	Menu		Press to activate the OSD. Use the directional
			keys and the Menu button to navigate through
			the OSD.

28

Using Your Projector