Dell S300W manual Using Your Projector

NOTE: Closed caption option is available for NTSC only.

TEST PATTERN—Test Pattern is used to test focus and resolution.

You can enable or disable the Test Pattern by selecting Off, 1 or 2. You can also invoke the Test Pattern 1 by pressing and holding down and buttons on the control panel simultaneously for 2 seconds. You can also invoke the test pattern 2 by pressing and holding down and buttons on the control panel simultaneously for 2 seconds.

Test Pattern 1:

Test Pattern 2:

FACTORY RESET—Select and press to reset all settings to its factory default, the warning message below appears.

Reset items include both computer sources and video source settings.

Using Your Projector

51