Dell S300W manual Using Your Projector

PASSWORD—When Password Protect is enabled, a Password Protect screen requesting you to enter a password will be displayed when the power plug is inserted into the electrical outlet and the power for the projector is first turned on. By default, this function is disabled. You can enable this feature, by selecting Enabled. If the password has been set before, key in the password first and select the function. This password security feature will be activated the next time you turn on the projector. If you enable this feature, you will be asked to enter the projector's password after you turn on the projector:

1First time password input request:

dGo to Others menu, press and then select Password to Enable the password setting.

eEnabling the Password function will pop up a character screen, key in a 4-digit number from the screen and press .

fTo confirm, enter the password again.

gIf the password verification is successful, you may resume with accessing the projector's functions and its utilities.

48

Using Your Projector