VocoPro Club-8000 VP-2100 PRO to VX-15 speakers, Connecting Microphones to the KJM-8000+

4 VP-2100 PRO to VX-15 speakers

Speakers 1 and 2

Using the SPEAKON style to ¼” adapter and ¼”(m) to ¼”(m) cable (included):

1.Connect the SPEAKON style end to CH.1 on the rear panel of the VP-2100 PRO

2.Connect one end of the ¼” cable to the ¼” end of the adapter

3.Connect the other end of the ¼” cable to one of the four VX-15’s.

3.Repeat this for the second speaker, except now connect the SPEAKON style end to CH. 2 on the VP-2100 PRO and the ¼” end to the second VX-15 speaker.

Speakers 3 and 4

Using a ¼”(m) to ¼”(m) cable

1.Connect one end of the ¼” cable to the open ¼” jack on the rear of speaker 1

2.Connect the other ¼” end to the back of the 3rd speaker.

3.Repeat this for the final speaker now going from the back of speaker 2 and into the 4th speaker.

VP-2100 PRO Amplifier

	-BRIDGE+
		CH 2	CH 1
		STEREO	50Hz	ON
		THROUGH		THROUGH
		MONO	30Hz	OFF
		BRIDGE	LOW CUT
			FILTER/
MODEL VP-2100PRO	SPEAKER OUTPUTS	BALANCED INPUTS

	VX-15 Speaker #1	VX-15 Speaker #2
VX-15 Speaker #3			VX-15 Speaker #4

5 Connecting Microphones to the KJM-8000+

Using either a mic cable with two XLR ends (Fig. A) or an XLR to ¼” cable (Fig. B):

Connect the microphone cables to the MIC inputs on the rear panel of the KJM-8000+.

CDG(1)

DVD(2)

LD(3)

KJM-8000+ Mixer

CDG(1)

DVD(2)

LD(3)

6 Adding the VSP-M1 to the CLUB-8000 system

Using either a mic cable with two XLR ends or an XLR to ¼” cable:

1.Connect the XLR(f) end to the LEFT BALANCED OUTPUT on the rear panel of the VSP-M1.

2.Connect the XLR(m) or ¼” end to MIC input 1 on the rear panel of the KJM-8000+.

3.Follow the above steps, now going from the RIGHT BALANCED OUTPUT on the VSP-M1 to MIC input 2 on the rear panel of the KJM-8000+.

4.Connect the mics to the mic inputs on the rear panel of the VSP-M1.

VSP-M1 Processor

CDG(1)

DVD(2)

KJM-8000 PRO Mixer

LD(3)