Philips DVP3005K/74 Connections, Connecting the power cord, Using an accessory RF modulator

Connections
					Connecting the power cord
	RF coaxial cable to TV
	2
	Back of RF Modulator
		(example only)
	INT IN TO TV	VIDEO	AUDIO IN
		IN	R	L
				CH3	CH4
							COMPONENT
						S-VIDEO	VIDEO IN
					AUDIO	IN	V (Pr/Cr)
					OUT
							U (Pb/Cb)
						VIDEO IN
							Y
	Antenna or
	Cable TV signal			1
	DIGITAL						AUDIO	DIGITAL
UDIO								OUT
	OUT
							OUT
OUT
	VIDEO
	OUT
	CVBS							CVB

IMPORTANT!

–If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

Using an accessory RF modulator

1Use the composite video cable (yellow) to connect the DVD Player’s CVBS (VIDEO OUT) jack to the video input jack on the RF modulator.

2Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.

After everything is connected properly, plug in the AC power cord to the power outlet.

Never make or change any connections with the power switched on.

When no disc is loaded, press

STANDBY ON on the DVD Player front panel,

“NO DISC” may appear on the display panel.

NO DISC

10

01-37 DVP3005K_751	10	3139 246 15761
		15/06/05, 4:42 PM