Problem (continued) | Possible Solution (continued) |
The image is stretched when | The projector automatically detects the input |
displaying a 16:9 DVD | signal format. It will maintain the aspect ratio |
| of the projected image according to input |
| signal format with an Original setting. |
| If the image is still stretched, adjust the aspect |
| ratio in the Set Up menu in the OSD. |
|
|
Image is reversed | Select Set Up from the OSD and adjust the |
| projector mode. |
Lamp is burned out or makes a popping sound
When the lamp reaches its end of life, it may burn out and may make a loud popping sound. If this occurs, the projector does not turn back on. To replace the lamp, see "Changing the Lamp" on page 67.
LAMP light is solid amber | If the LAMP light is solid amber, replace the |
| lamp. |
|
|
LAMP light is blinking amber | If the LAMP light is blinking amber, Lamp |
| module connection may be disrupted. Please |
| check the lamp module and ensure that it is |
| properly installed. |
| If the LAMP light and the Power light are |
| blinking amber, the lamp driver has failed and |
| the projector will automatically shut down. |
| If the LAMP and TEMP light are blinking |
| amber and the Power light is solid blue, the |
| color wheel has failed and the projector will |
| automatically shut down. |
| To clear the protection mode, press and hold |
| the POWER button for 10 seconds. |
|
|
TEMP light is solid amber | The projector has overheated. The display |
| automatically shuts down. Turn the display on |
| again after the projector cools down. If the |
| problem persists, contact Dell™. |
|
|
64
Troubleshooting Your Projector