Dell 7609WU manual Adjusting the Projected Image, Raising the Projector Height

NOTE: If you press the Power button while the projector is running, the "Press Power Button to Turn off Projector" message appears on the screen. To clear the message, press the Menu button on the control panel or ignore the message; the message disappears after 10 seconds.

Adjusting the Projected Image

Raising the Projector Height

1 Press the Elevator button.

2 Raise the projector to the desired display angle, and then release the button to lock the elevator foot into position.

3 Use the tilt adjustment wheel to fine-tune the display angle.

Lowering the Projector Height

CAUTION: Support the projector properly and do not place you hand near the elevator foot when pressing the elevator button.

1 Press the Elevator button.

2 Lower the projector, and then release the button to lock the elevator foot into position.

1

2

3

Elevator button

Elevator foot

Tilt adjustment wheel

Using Your Projector

22