17 | Keystone |
| Press to adjust image distortion caused by tilting |
| adjustment |
| the projector. (±30 degrees) |
|
|
|
|
18 | Source |
| Press to switch between Digital RGB, Analog |
|
|
| RGB, Composite, |
|
|
| sources. |
|
|
|
|
19 | Auto adjust |
| Press to synchronize the projector to the input |
|
|
| source. Auto adjust does not operate if the OSD |
|
|
| |
|
|
|
|
20 | Keystone |
| Press to adjust image distortion caused by tilting |
| adjustment |
| the projector. (±30 degrees) |
|
|
|
|
Using the On-Screen Display
The projector has a
To navigate through the tabs in the Main menu, press the 
or 
buttons on your projector’s control panel or remote control. To select a submenu, press the Enter button on your projector’s control panel or remote control.
To select an option, press the 
or 
on your projector’s control panel or remote control. When an item is selected, the color changes to dark blue. Use 
or 
on the control panel or remote control to adjust the settings.
To go back to the Main menu, go to the Back tab and press the Enter button on the control panel or the remote control.
To exit the OSD, go to the EXIT tab and press the Enter button or press the Menu button directly on the control panel or the remote control.
Main Menu
INPUT SELECT
The Input Select menu allows you to select your projector’s input source.
Using Your Projector
29