Dell 7609WU manual Apply Change-Press Enter to confirm the settings

•4:3 — The input source scales to fit the height of the screen and projects a 4:3 image.

•Wide — The input source scales to fit the width of the screen to project a wide screen image.

NETWORK SETTINGS—Allows you to manage the network configuration. Press Enter to open the Network Settings menu.

•DHCP—Select On to assign an IP address to the projector from a DHCP server automatically. Select Off to assign an IP address manually.

•IP Address—Press Enter to set up an IP address. Press or to select the number position, or to change the number.

•Subnet Mask—Press Enter to set up a subnet mask number. Press or to select the number position, or to change the number.

•Gateway—Press Enter to set the default gateway of the network connected to the projector. Press or to select the number position, or to change the number.

•DNS—Type in the IP address of the DNS server on the network connected to the projector. 12 numeric characters are used.

•Apply Change—Press Enter to confirm the settings.

•Reset Network—Press Enter to reset to the default settings.

•Network—Select On to activate and Off to deactivate network connections.

DC 5V POWER—Select this option to turn the DC 5V power On or Off.

VGA LOOP THROUGH—Select this option to turn the VGA Loop through On or Off.

Using Your Projector

32