Delta Electronics TP02G-AS1 instruction sheet Introduction, Function Specifications

http://www.delta.com.tw/industrialautomation/

Terminal Panels Series!

Instruction Sheet

Warning

3Please read this instruction carefully before use.

3Switch off the power before wiring.

3The display panel of TP02 series is waterproof. But please prevent grease, corrosive liquids and sharp objects from contacting the TP02 series.

3The TP02 series require 24VDC input power. DO NOT connect input AC power supply to any of the RS-485 communication port; otherwise serious damage may occur. Check all the wiring again before switching on the power.

3DO NOT touch any terminal when the power is switched on. DO NOT touch any internal circuit in 1 minute after the power is switched off.

3Make sure the groud terminal is correctly grounded in order to prevent electromagnetic interference.

3Please use the fixed support accessory which is packed together with the product provided by Delta. DO NOT tighten the screws out of the normal torque specifications; otherwise serious damage may occur.

XIntroduction

1.1 Model Explanation

Thank you for choosing Delta TP Series. TP02G-AS1 has the features of high resolution 160×32 dots. It provides multilingual display and two built-in communication ports, one is for RS-232 and the other is for RS-485. RS-232 and RS-485 can be used simultaneously. Besides, it also supports communication and alarm LED indicators. The user can purchase program copy card (optional) to copy settings and programs quickly and save download time.

™Nameplate Explanation

Production model	MODEL :		TP02G-AS1
Power input spec.	POWER INPUT : 24Vdc 3W
Barcode and
serial number
Version	VX.XX	TP02GAS1W6050004
	DELTA ELECTRONICS, INC			MADE IN XXXXXXX

NOTE: The words of “MADE IN XXXXX” will be different due to the manufacturing location. Please refer to the actual product for exact description.

™ Model / Serial No. Explanation
TP 02 G - AS 1		TP02GAS 1 W 6 05 0004
	Reserved		Production serial number
			Production weeks
	Reserved
	T: Text mode		Production year (2006)
	G: Graphic mode		Production plant
	LCD Spec.
			(W: Wuijang; T: Taoyuan)
	Series name		Version
			Production model

1.2 Product Outline

PANEL COMPONENT	EXPLANATION
Escape / Exit Key	It is used to cancel an incorrect input, or to exit a programming step.
Enter Key	It is used to input a value or accept a programming command.
	UP / Pg Up: It is used to increase the value or move up one page.
	Pg Dn / DOWN: It is used to decrease the value or move down one page.
Arrow Keys	Left: This key is left direction key and it can be used to select the position of the
	value.
	Right: This key is right direction key and it can be used to select the position of
	the value.
	F0 / 0: It is used as a constant 0, or the user can define it as function F0.
	F1 / 1: It is used as a constant 1, or the user can define it as function F1.
	F2 / 2: It is used as a constant 2, or the user can define it as function F2.
	F3 / 3: It is used as a constant 3, or the user can define it as function F3.
Function Keys	F4 / 4: It is used as a constant 4, or the user can define it as function F4.
	F5 / 5: It is used as a constant 5, or the user can define it as function F5.
	F6 / 6: It is used as a constant 6, or the user can define it as function F6.
	F7 / 7: It is used as a constant 7, or the user can define it as function F7.
	F8 / 8: It is used as a constant 8, or the user can define it as function F8.
	F9 / 9: It is used as a constant 9, or the user can define it as function F9.

1.4 Back Panel

RS-232

Extension port

5 PIN terminal / Wire gauge: 12-24 AWG / Torque: 4.5 lb.-inch

1.5 Dimension

Front panel (unit: mm [inch])

Right side diagram (unit: mm [inch]) Back panel

Vertical view (Unit: mm)

1.6 Installation

Please insert TP02 series to the opening hole of panel and tighten the screws. However, if a firm mounting TP02 series to the panel is needed, please use the mounting fixed support accessory which is packed together with TP02 series, then insert the fixed support in the back and tighten the screws.

If the fixed support is not installed well, Delta will not guarantee the waterproof function. The screw torque should be 4-5(kg-cm). DO NOT exceed this specification when tightening the screws; otherwise TP02 series may be damaged. Please leave sufficient space (more than 50mm) around the unit for heat dissipation.

Do not install and mount TP02 series in the following environment.

hA location subjected to Airborne dust, metallic particles, oil and smoke, corrosive or flammable gases and liquids.

h A location where temperature and humidity will exceed specifications.

hA location where vibration and shock will exceed specifications.

™The flat surface should be a UL Type 4 "Indoor Use Only" enclosure or equivalent (IP65 / NEMA4). Please refer to the figures below.

Thickness: 0.5~9.0mm

YFunction Specifications

ITEM	TP02G-AS1
Screen Type	STN-LCD
Display Color	Monochromatic
Backlight	The back-light automatic turn off time is 1 ~ 99 minutes (0 = do not turn off)
	(The back-light life is about 50 thousand hours at 25°C)
Resolution	160 x 32 dots
Display Range	(W) x (H) = 72 x 22 (unit: mm)
Contrast Adjustment	15 levels of adjustment
	ASCII: Alphanumeric (including European characters)
Language / Font	Taiwan: (Big 5 codes) Traditional Chinese Fonts
	China: (GB2324-80 codes) Simplified Chinese Fonts
Font Size	ASCII: 5 × 8, 8 × 8, 8 × 12, 8 × 16
	1. Power on indication (Blink for three times)
Alarm LED Indicator (RED)	2. Communication error alarm
	3. Special indication by user programming

Displaying Area

Escape / Exit Key

Alarm LED Indicator

RS-232 LED Indicator

RS-485 LED Indicator

Function Keys

Arrow Keys

RS-232 LED Indicator	It will blink when transmitting program and communicating by using RS-232.
(Yellow)
RS-485 LED Indicator	It will blink when communicating by using RS-485.
(Green)
Program Memory	256KB flash memory
	Unsynchronized transmission method: RS-232
Serial Communication Port	Data length: 7 or 8 bits, Stop bits: 1 or 2 bits
RS-232 (COM1)	Parity: None/Odd/Even, Transmission speed: 4,800bps ~115,200bps
	RS-232: 9 PIN D-SUB male

Enter Key

1.3 Panel Function Explanation

PANEL COMPONENT	EXPLANATION
Alarm LED Indicator	Status 1: When power is on, LED will blink slowly for three times.
	Status 2: When there is an abnormal situation, LED will blink quickly along with
(RED)
	an alarm sound.
RS-232 LED Indicator	LED will blink when transmits program and communicates via RS-232.
(Yellow)
RS-485 LED Indicator	LED will blink when communicates via RS-485.
(Green)
Displaying Area	Liquid Crystal Module display area. It is used to display current program status.

Mounting dimension (unit: mm [inch])

85

[3.35]

135~136.5[5.31~5.37]

Thickness Range 0.5~9mm

Extension Communication	Unsynchronized transmission method: RS-485
	Data length: 7 or 8 bits, Stop bits: 1 or 2 bits
Port
	Parity: None/Odd/Even, Transmission speed: 4,800bps ~115,200bps
RS-485 (COM2)
	RS-485: 5 PIN removal terminal
Extension Interface	1. Update firmware version
	2. The slot for program copy card
Battery Cover	DC 3V battery for HMI
5 PIN Removal Terminal	Include DC 24V input and RS-485 communication input