adjust the settings.
To go back to Main menu, go to Back tab and press the Enter button on the control panel or the remote control.
To exit the OSD, go to EXIT tab and press the Enter button or press the Menu button directly on the control panel or the remote control.
Main Menu
INPUT SELECT
The Input Select menu allows you to select your projectors input source.
AUTO SOURCE—SelectOn (the default) to autodetect the available input signals. If you press the Source button when the projector is on, it automatically finds the next available input signal. Select Off to lock the current input signal. If you press the Source button when the Auto Source mode is set to Off, you can
manually select the input signal. VGA-A—Press Enter to detect VGA-A signal. VGA-B—Press Enter to detect VGA-B signal. DVI-D—Press Enter to detect DVI-D signal. S-VIDEO—Press Enter to detect S-Video signal.
COMPOSITE VIDEO—Press Enter to detect Composite Video signal.
