Delta Electronics Series E48SH manual Mechanical Drawing, Pin No Name Function

Page 13

MECHANICAL DRAWING

SURFACE-MOUNT MODULE

THROUGH-HOLE MODULE

Pin No.	Name	Function
1	+Vin	Positive input voltage
2	ON/OFF	Remote ON/OFF
3	-Vin	Negative input voltage
4	-Vout	Negative output voltage
5	-SENSE	Negative remote sense
6	TRIM	Output voltage trim
7	+SENSE	Positive remote sense
8	+Vout	Positive output voltage

E48SH3R330_02162007

13

Image 13

Contents Features Parameter Technical SpecificationsTypical full load input characteristics at room temperature Electrical Characteristics CurvesFor Negative Remote On/Off Logic Electrical Characteristics Curves Input reflected ripple current, is, through a 12µH Input Source Impedance Design ConsiderationsFeatures Descriptions Output Voltage Adjustment Trim Features Descriptions CONThermal Considerations Thermal Testing SetupThermal Curves Thermal DeratingE48SH3R33002162007 Lead Free SAC Process Recommend TEMP. Profile Leaded Sn/Pb Process Recommend TEMP. ProfilePin No Name Function Mechanical DrawingMechanical Drawing with Heatspreader Model List Part Numbering System