Delta Electronics IPM- C Series manual Appendix C Evaluation Board Layout Bottom View

Page 16

Appendix C - Evaluation Board Layout (Bottom View)

CONTACT: www.delta.com.tw/dcdc

USA:

Europe:

Asia & the rest of world:

Telephone:

Phone: +41 31 998 53 11

Telephone: +886 3 4526107 ext 6220

East Coast: (888) 335 8201

Fax: +886 3 4513485

Fax: +41 31 998 53 53

West Coast: (888) 335 8208

Email: DCDC@delta.com.tw

Email: DCDC@delta-es.com

Fax: (978) 656 3964

 

 

 

Email: DCDC@delta-corp.com

 

 

WARRANTY

Delta offers a two (2) year limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta.

Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice.

16

Image 16
Contents Purpose IPM- C Series POL convertersRelevant Documentation Equipment Required Equipment Set-Up and DescriptionThermal Management of the Converter Tests Performed Test Set-UpSW4 Function Table Initial Power Up Tests and EvaluationTest No Load Input Current TestLoad Regulation Output Characteristics Line RegulationOutput Ripple Output Voltage Set-Point Adjustment Range Trim For IPM12C series− 0.187 kΩ For IPM12C series Dynamic Characteristics Output Voltage Deviation Turn-On Transient TimeTest Turn on the module by using the external switch Test Turn on the module by using the Enable on/off Vin=5.5V Vin=5.0V Vin=4.0V Appendix A- Evaluation Board Schematic Appendix B Evaluation Board Layout Top View Appendix C Evaluation Board Layout Bottom View