Delta Electronics OPEP-33-A4K1R manual Absolute Maximum Ratings, Recommended Operating Conditions

OPEP-33-A4K1R

1. Absolute Maximum Ratings

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Storage Temperature	Ts	-40		85	ºC
Storage Ambient Humidity	HA	5		95	%
Power Supply Voltage	VCC	-0.3		4	V
Signal Input Voltage		-0.3		Vcc+0.3	V
Receiver Damage Threshold		+7			dBm
Lead Soldering Temperature/Time	TSOLD			260/10	ºC/sec	Note (1)
Lead Soldering Temperature/Time	TSOLD			380/10	ºC/sec	Note (2)

Note (1). Suitable for wave soldering

Note (2). Only for soldering by iron

2. Recommended Operating Conditions

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Ambient Operating Temperature	TA	0		70	ºC	Without air flow
Ambient Humidity	HA	5		85	%	Non-condensing
Power Supply Voltage	VCC	3.13	3.3	3.47	V
Power Supply Current	ICC			300	mA
Power Supply Noise Rejection				100	mVp-p	100Hz to 1MHz
Data Rate		1.25	1.25	1.25	Gbps
		-100ppm		+100ppm
Transmission Distance				20	km

3. Specification of Transmitter

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Average Launched Power (B.O.L)	PO	0		+4	dBm	Note (1)
Average Launched Power (E.O.L)	PO	-0.5		+4.5	dBm	Note (1)
Launched power (Peak.)	PP			+7.5	dBm
Extinction Ratio	ER	9			dB
Center Wavelength	λC	1260	1310	1360	nm	DFB Laser
Spectrum Width (RMS)	σ	Compliant with IEEE 802.3ah			nm	Note (4)
Side Mode Suppression Ratio	SMSR	30			dB
Transmitter OFF Output Power	POff			-45	dBm
Laser Burst On Time	Ton			32
Laser Burst Off Time	Toff			32
Optical Rise/Fall Time	tr/tf			260	ps	Note (2)
Total Jitter	tJ			128	ps	Note (3)
Optical Return Loss Tolerance	ORLT			15	dB
Relative Intensity Noise	RIN15OMA			-115	dB/Hz
Optical Transmitter Reflectance				-10	dB
Transmitter and Dispersion Penalty	TDP			1.8	dB
Output Eye Mask	Compliant with IEEE 802.3ah					Note (5)
{X1,X2,Y1,Y2,Y3}	{0.22,0.375,0.20,0.20,0.30}

Note (1). Launched power (avg.) is power coupled into a single mode fiber with master connector. B.O.L=Before of Life; E.O.L= End of Life

2	Revision: S0
	06/01/2007
DELTA ELECTRONICS, INC.	www.deltaww.com