SYSTEM SPECIFICATIONS
FM TRANSMITTER, MODEL T36
Dimensions: | 4.1” L x 2.8” W x 1.1” H (104 mm x 71 mm x 28 mm) |
Weight: | 2.6 oz (74 g), no batteries |
Housing Material: | |
Battery Type: | Two (2) AA 1.5 V |
| 70 mA nominal current drain, 30 hours approx. life or |
| Two (2) AA 1.5 V NiMH rechargeable batteries (BAT 026), 70 mA |
| nominal current drain, 20 hours per charge approx., recharges in |
| |
Operating Freq’s: | Selectable, 16 channels, 72.1 – 75.9 MHz* (channels |
| spond with |
Stability: | ± .005%, frequency synthesized, crystal reference, PLL |
Modulation: | |
RF Output: | 80 mV/m at 3 m (max. allowed by FCC rules) |
Freq Response: | 200 Hz to 13 kHz, ± 3 dB at 1% max. THD |
65 dB (typical) transmitted | |
Transmit Antenna: | Integral with microphone cord |
Microphone: | Electret type, 3.5 mm mono phone plug |
External Controls: | Momentary push button: push and hold 3 seconds for power On/Off, |
| push and release for microphone mute On/Off; Rotary sixteen channel |
| switch (with internal channel lock switch) |
Mic Input: | 3.5 mm mono phone jack with electret mic bias, internal adjustable |
| gain with 25 dB range |
Aux Input: | 2.5 mm stereo phone jack, internal adjustable gain with 60 dB range |
Audio Compression: | 1:1 or 2:1 ratio selected with internal slide switch |
Compatible Receivers: PFM R31, PFM R32, PFM R33, PFM R36, PPA R35, PPA
Approvals/Directives: FCC, Industry Canada, RoHS, WEEE
Warranty: | 5 years, parts and labor (90 days on accessories) |
Note: | FCC regulations, section 15.21, requires the user to comply with the |
| rules of transmitter operation. Any changes or modifications made |
| by the user not expressly approved for compliance may result in the |
| loss of all privileges and authority to operate the equipment |
*DISCLAIMER: FCC RULES LIMIT USE OF THIS EQUIPMENT TO AUDITORY ASSISTANCE
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
7 |
| ® |
