Delta Electronics VFD-XXXM quick start Voltage Class 575V Class

	Voltage Class				575V Class
Model Number VFD-XXXM		007	015		022		037		055	075
Max. Applicable Motor Output (kW)		0.75	1.5		2.2		3.7		5.5	7.5
Max. Applicable Motor Output (hp)		1.0	2.0		3.0		5.0		7.5	10
Rating	Rated Output Capacity (kVA)	1.7	3.0		4.2		6.6		9.9	12.2
	Rated Output Current (A)	1.7	3.0		4.2		6.6		9.9	12.2
Output	Maximum Output Voltage (V)		3-phase Proportional to Input Voltage
	Output Frequency (Hz)				0.1~400 Hz
	Carrier Frequency (kHz)					1-10
Rating	Rated Input Current (A)					3-phase
		2.4	4.2		5.9		7.0		10.5	12.9
Input	Rated Voltage, Frequency			3-	phase 500~600			VAC, 50/60Hz
	Voltage Tolerance				-15%~+10% (425~660 VAC)
	Frequency Tolerance					± 5% (47~63 Hz)
Cooling Method					Fan Cooled
Weight (kg)		1.5	1.5		2.0			3.2	3.2	3.3

	Control System
	Freq. Setting Resolution
	Output Frequency
Characteristics	Resolution
	Accel/Decel Time
	Torque Characteristics
	Overload Endurance
	Skip Frequency
Control
	Stall Prevention Level
	Frequency Setting
	DC Injection Braking
	Braking Torque
	V/F Pattern
		Keypad
	Frequency
		External
	Setting
		Signal
Characteristics
	Operation	Keypad
	Setting	External
	Signal	Signal
Operating	Multi-Function Input Signal
	Multi-Function Output
	Indication
	Analog Output Signal
	Alarm Output Contact
	Operation Functions

General Specifications

SPWM (Sinusoidal Pulse Width Modulation) control (V/F or sensorless vector control)

0.1Hz

0.1Hz

Including the auto-torque, auto-slip compensation; starting torque can be 150% at 5.0Hz

150% of rated current for 1 minute Three zones, settings range 0.1-400Hz

0.1to 600 seconds (4 Independent settings for Accel/Decel Time) 20 to 200%, Setting of Rated Current

Operation frequency 0-60Hz, output 0-100% rated current Start time 0-5 seconds, stop time 0-25 seconds

Approx. 20% (up to 125% possible with option brake resistor or brake unit externally mounted, 1-15HP braking transistor built-in)

Adjustable V/F pattern Setting by

Potentiometer-5KΩ/0.5W, 0 to +10VDC, 4 to 20mA RS-485 interface; Multi- Function Inputs 0 to 5 (7 steps, Jog, up/down)

Set by RUN, STOP

M0 to M5 can be combined to offer various modes of operation, RS-485 serial interface (MODBUS).

Multi-step selection 0 to 7, Jog, accel/decel inhibit, first to forth accel/decel switches, counter, PLC operation, external Base Block (NC, NO), auxiliary motor control is invalid, selections, driver reset, UP/DOWN key settings, sink/source selection

AC drive operating, frequency attained, non-zero, base block, fault indication, local/remote indication, PLC operation indication, auxiliary motor output, driver is ready, overheat alarm, emergency stop

Analog frequency/current signal output.

1 Form C contact or open collector output

AVR, S-Curve, over-voltage, over-current stall prevention, fault records, adjustable carrier frequency, DC braking, momentary power loss restart, auto tuning, frequency limits, parameter Lock/Reset, vector control, counter, PID Control, PLC, MODBUS communication, reverse Inhibition, abnormal reset, abnormal re-start, digital frequency output, sleep/revival function, 1st/2nd frequency source selections

English-3