Delta Electronics S48SP manual Mechanical Drawing, Surface-mount module Through-Hole module

Page 13

MECHANICAL DRAWING

Surface-mount module

Through-Hole module

Pin No.	Name	Function
1	+Vin	Positive input voltage
2	-Vin	Negative input voltage
3	ON/OFF (Optional)	Remote ON/OFF (Optional)
4	-Vout	Negative output voltage
5	TRIM (Optional)	Output voltage trim (Optional)
6	+Vout	Positive output voltage

DS_S48SP05007_05222008

13

Image 13

Contents Features Parameter Technical SpecificationsTypical full load input characteristics at room temperature Electrical Characteristics CurvesFor Positive Remote On/Off Logic For Negative Remote On/Off LogicElectrical Characteristics Curves Output voltage noise and ripple measurement test setup Soldering and Cleaning Considerations Safety ConsiderationsDesign Considerations Input Source ImpedanceOver-Temperature Protection Features DescriptionsOver-Current Protection Remote On/OffOutput Voltage Adjustment Features Descriptions CONThermal Curves Thermal ConsiderationsRecommended PAD Layout SMD Pick and Place LocationLead Free SAC Process Recommend TEMP. Profile Leaded Sn/Pb Process Recommend TEMP. ProfileSurface-mount module Through-Hole module Mechanical DrawingModel List Part Numbering System