4-1 Communications Areas
The following diagram shows the communication area available when a standard Tag is used at ambient temperature, 25°C. The communication area varies depending on Antenna installation conditions, Tag forming conditions, Tag installation conditions and ambient temperature; therefore, verify the communication area beforehand.
Since the coil in the Antenna is more or less rectangular (316mm×265mm), the horizontal communication distance slightly different from the vertical one. The Antenna surface and Tag surface are arranged in parallel.
Tag to be tested:
Y[mm] | X |
|
|
| アンテナ |
| Y | Antenna |
|
| |
Horizontal | タグ |
|
Tag |
| |
plane (H) |
|
|
0 |
| X[mm] |
|
|
Vertical plane (V)
cm | * Following communication area is applicable for both functions; read and write. |
60 |
|
|
|
|
|
|
|
|
|
|
50 |
|
|
|
|
|
|
|
|
|
|
40 |
|
|
|
|
|
|
|
|
|
|
30 |
|
|
|
|
|
|
|
|
|
|
20 |
|
|
|
|
|
|
|
|
|
|
10 |
|
|
|
|
|
|
|
|
|
|
0 |
|
|
|
|
|
|
|
|
|
|
50 | 40 | 30 | 20 | 10 | 0 | 10 | 20 | 30 | 40 | 50 cm |
Communication Area
Communication Areas
●The communication area varies depending on Antenna installation conditions, Tag forming conditions, Tag installation conditions and ambient temperature; therefore, verify the communication area beforehand.